ECCENTRIC SCREW PUMPS
For pumping high-viscous, still flowable media, we offer a complete range of eccentric screw pumps.
With electric motor or air operated motor, they are used to transfer thin liquids and viscous substances up to 100,000 mPas, preferably stationary, used in continuous operation.
The flow rates are standard at 12, 25 or 50 liters/min, thefunding pressures on 6 or 12 bar.
The pump tubes are made of stainless steel 316Ti, the stators of NBR, NBR light, FKM, EPDM, EPDM light or PTFE.
DOSING PUMPS
Eccentric screw pump JP-700 SR (SPEED REDUCER)
Pump tube for eccentric screw pump JP-700 SR
Pump tube for eccentric screw pump JP-700 DR
Pump tubes for eccentric screw pumps JP-700 DR
Eccentric screw container pumps JP-700.80, -200, -300
Pump tube eccentric screw container pumps JP-700.80, -200, -300
Horizontal eccentric screw pumps JP-700 H / -HL
Dosing pumps
Block pumps
Eccentric screw pumps
JP-700 PB / -PS
Dry run protection
Accessories, spare parts for eccentric screw pumps
Multi component system
Mobile single-column drum emptying plant
Stationary single-column drum emptying plant
Bottling plant with hopper
Eccentric screw pumps for almost all applications JP-700
Drive with electric or air operated motor
The following materials are available for the stator of the eccentric screw pumps
NBR black max. 90°C, suitable for oily and greasy media, alcohol and aqueous solutions.
Not resistant to acids, alkalies and solvents.
NBR white Nitrile, max. 90°C, suitable for oily and greasy media, alcohol and food.
Not resistant to acids, alkalies and solvents.
FKM max. 160°C, high chemical resistance.
PTFE max. 200°C, high chemical resistance, suitable for food, pharmaceutical and cosmetic products.
EPDM max. 110°C, good resistance to alkalies (undiluted and diluted), acids (diluted), ketones, alcohols.
Food-safe (corresponding to BGVV recommendations and in the composition of the positive list of FDA).
Not resistant to oils and fats when transferring milk (3.5% fat) a sufficient resistance is given.
Information needed to select the right eccentric screw pump
Specification of the liquid.
Viscosity and medium temperature
Density.
Required flow rate.
Head including pipe losses.
Content as well as type and size of solids.
Will the pump be used mobile or stationary, vertical or horizontal?
Operating hours per day.
In addition to our barrel pumps for low viscosity and medium viscosity media up to 1000 mPas, we can offer a complete range of high viscosity eccentric screw pumps for transporting highly viscous, still flowable media. Our large stock pumps are of the type of eccentric screw pumps, where the flow rate is determined by the geometry and the clearance between the rotating rotor (screw conveyor of stainless steel) and the stationary stator (in the opposite direction rubber or solid mixture).
For almost 10 years, we supply our pumps to customers in industry and agriculture.
We also repair other brands reliably.
We can offer you our high viscosity dosing pumps in different versions:
In principle, the first step is to choose between the vertical or horizontal version of a drum or container pump.
Eccentric screw pumps as drum and container pumps
With electric motor or air operated motor, they are used to transport thin liquids and viscous substances to 100,000 mPas, preferably stationary, used in continuous operation.
The flow rates are standard at 12, 25 or 50 liters/min, the funding pressures on 6 or 12 bar. We can also build the vertical design as a dosing pump with a small performance.
The pump tubes are made of stainless steel 316Ti, the stators of NBR, NBR light, FKM, EPDM, EPDM light or PTFE.
Eccentric screw pumps as container pumps
With AC motor, three-phase motor or air operated motor, they are used to transport thin liquids and viscous substances to 100,000 mPas, preferably stationary, used in continuous operation (also ATEX certified).
The flow rates are standard at 80, 200 or 300 liters/min, the funding pressures on 6 or 12 bar.
The pump tubes are made of stainless steel 316Ti, the stators of NBR, NBR light, FKM, EPDM, EPDM light or PTFE.
Horizontal eccentric screw pumps
Transport liquids with low or high viscosity, neutral or aggressive, with or without solids or fibers.
The pump tubes are made of stainless steel 316Ti,
the stators of NBR, NBR light, FKM, EPDM, EPDM light or PTFE.
Flow rate: up to 3 m³/h, pressure stages: 6 and 12 bar
Horizontal pumps in block version
A cost-effective variant are the pumps in block version. At these pumps the motor is directly flanged. By saving the bearing base as well as the elastic coupling, shorter designs can be realized.
Flow rate: up to 200 m³/h, pressure stages: 6 and 12 bar.
High viscosity dosing pumps
Suitable for dispensing low viscosity, viscous, neutral and aggressive media with or without solids.
The standard flown rate of this series are between 0.6 – 60 l/h.
The flow rate is either controlled by a hand-shifted motor or a geared motor with frequency converters.
Also a series as a drum pump, as well as filling systems for the dosing of small quantities are available.
Drum emptying stations
Mobile and stationary drum emptying stations.
Stationary drum emptying stations with follower plate for non-flowable media.
Bottling plant with hopper.
Spare parts
Spare parts for eccentric screw pumps: stators, rotors, pump parts, couplers, mechanical seals, cuffs, etc.
If you have regular spare parts requirements, we also offer you a free storage of the spare parts for our eccentric screw pumps.
We also perform pump repairs and maintenance in our company quickly and reliably. Our quotations are free of charge.
In addition, our technicians offer you competent and free of charge consultations to extend the life of your eccentric screw pumps. Beside the exact application, we also check the suitability of the selected pump materials.
