ACCESSORIES FOR LABORATORY PUMPS

Nozzle made of polypropylene
for a safe filling and transferring of low quantities with hose connection ½” (NW 13)”.

  Order.-No.
½" 9016

Nozzle made of polypropylene
Housing and internal parts made of polypropylene, valve seat and O-rings made of FKM or EPDM, spring of hastelloy 2.4610, rotatable hose connection.
Flow rate: 80 l/min*
Viscosity: 800 mPas*
Operating pressure: 3 bar*
Weight: 210 g

  Order.-No.
½" 9101
¾" 9102
Barrel adapter

Barrel adapter
for secure fixing of drum pump in bung hole of a drum G 2″.

The barrel adapters fit due to their 2″ thread in 60 and 200 liter steel drums. For use with plastic drums or plastic containers they can be combined with the thread adapters.

  Order.-No.
Polypropylene
 
Ø 25 mm 9078
Ø 28 mm 9079
Ø 32 mm 9080
Edelstahl
 
Ø 25 mm 9081
Wall hanger for laboratory pump

Wall hanger for laboratory pump
for a secure storage of barrel pump when out of operation and for protection against damages.

  Order.-No.
  9007
Universal chemical- and solvent hose

Universal chemical- and solvent hose,
conductive inner wall homogeneous, smooth, EPDM (Ethylene Propylene Rubber) conductive, suitable for many alkalies, acids, acetates, aldehydes, amines, esters, ethers and ketones, not suitable for carbonic gassy products and their derivates, as well as oils and gasoline.

Operating pressure: 16 bar*
Temperature: –40°C up to +90 °C*

  Order.-No.
½" 9054
¾" 9055
Multi purpose chemical hose

Multi purpose chemical hose, conductive
inner wall homogeneous, smooth, UHMWPE (UPE), conductive, suitable for nearly all chemicals, oils and gasoline. Not suitable for oleum, brom and chlorsulfon acid.

Operating pressure: 10 bar*
Temperature: –25°C up to +90 °C*

  Order.-No.
½" 9059
¾" 9060
PVC-Hose

PVC-hose
crystal clear with fabric lining, suitable for non flammable, neutral and aggressive media.
Operating pressure: 10 bar*
Temperature: –35 °C up to +60 °C*

  Order.-No.
½" 9049
¾" 9050

* All specified values are real measured maximum values.
* Test medium water 20° C, pressure pipe 1″, oval gear meter 1″, measured values:
± 5%

Thread adapters

Thread adapters
Thread adapters made of PE for equalization of different threads at canisters, drums, containers, etc. when fixing f.e. hand pumps.

Basically, the JESSBERGER hand pumps can be screwed into the threads of steel drums such as S 60 or S 200 without any problems due to their existing drum connections (e.g. 2 “BSP external thread).

Due to the variety of containers, canisters and drums produced on the market, especially made of plastic, there are also applications where the use of an adapter is absolutely necessary in order to be able to screw the pump safely and firmly into the container to be emptied.

Adapter material: PE (polyethylene) This material is resistant to water, many alkalis, as well as acids and salt solutions. It is conditionally resistant to oils, organic solvents and fuel. Upon contact with some of these substances, PE tends to swell, depending on its density.

Color Thread 1 / Thread 2 Order.-No.
  T1: 2"BSP fine, internal thread*
T2: 
DIN 71, internal thread
6001
  T1: 2"BSP fine, internal thread*
T2: 
DIN 61/31, external thread
6002
  T1: 2"BSP fine, external thread*
T2: 
DIN 61/31, external thread 
6003
  T1: 2"BSP fine, internal thread*
T2: 
DIN 61/31, internal thread
6004
  T1: 2"BSP fine, internal thread*
T2:
 
ASTM o 63, internal thread
6005
  T1: 2" Mauser, coarse, internal thread
T2: Trisure, coarse, 
external thread 
6006
  T1: 2"BSP fine, internal thread*
T2: 
Trisure, coarse, external thread
6007
  T1: 2"BSP fine, internal thread*
T2:
 2" Mauser, coarse, external thread 
6008
  T1: 2"BSP fine, internal thread*
T2:
 DIN 51, internal thread
6009
  All adapters No. 1-9 6010
  * 2" BSP (british standard pipe) corresponds to a diameter of 58 mm.

Contact form

Use this form to send us your request.