ACCESSORIES FOR DRUM PUMPS

Barrel adapter

for secure fixing of drum pump in bung hole of a drum G 2″.

The barrel adapters fit due to their 2″ thread in 60 and 200 liter steel drums. For use with plastic drums or plastic containers they can be combined with the thread adapters.

Polypropylene Order-No.
Ø 41 mm 9001
Stainless steel Order-No.
Ø 41 mm 9002

Hose connectors

in stainless steel with clamps made of aluminium (connection to pump tube female thread 1¼” and connection to nozzle female thread 1″).

  Oder-No.
2 pcs. 9010

Bounding ground set

  Oder-No.
Set 4 cables 9003
1 Ground cable 0,5 m 9003/1
1 Ground cable 1 m 9003/2
1 Ground cable 2 m 9003/3
1 Ground cable 3 m 9003/4

PVC-Hose

crystal clear with fabric lining, suitable for non flammable, neutral and aggressive media.

Operating pressure: 10 bar*
Temperature: –35°C up to +60°C**.

DW Oder-No.
¾” 9050
1″ 9051
1¼” 9052
1½” 9053

Universal chemical- and solvent hose, conductive

inner wall homogeneous, smooth, EPDM (Ethylene Propylene-Rubber) conductive, suitable for many alkalies, acids, acetates, aldehydes, amines, esters, ethers and ketones, not suitable for carbonic gassy products and their derivates as well as for oils and gasoline.

Operating pressure: 16 bar*
Temperature: –40°C up to +90°C*

DW Oder-No.
¾” 9055
1″ 9056
1¼” 9057
1½” 9058

Multi purpose chemical hose, conductive

inner wall homogeneous, smooth, PE-X (knitted polyethylene), conductive, suitable for nearly all chemicals, oils and gasoline. Not suitable for oleum, brom and chlorsulfon acide.

Operating pressure: 10 bar*
Temperature: –25°C up to +90°C*

DW Oder-No.
¾” 9060
1″ 9061
1″ FDA
9061b
1¼” 9062
1½” 9063

Mineral oil hose

½” PN10 with fabric lining
¾” PN10 with fabric lining
1″ PN10 with fabric lining
1¼” PN16 TW-hose
1½” PN16 TW-hose

DW Oder-No.
½” 9065a
¾” 9065
1″ 9066
1¼” 9067
1½” 9068

Rubber hose food grade BUTYL/BUTYL

suitable for animal and vegetable fat and oils, milk products, mineral water, fruit juice and alcohol up to 92%.

Temperature: up to 120°C.

NW Order-No.
¾” 9069a
1″ 9069
1¼” 9069b
1½” 9069c

Discharge arc

for transferring and filling liquids directly into other vessels. They are available in PP, Alu and stainless steel 316Ti and can be connected directly at the discharge side of a drum pump via a wing nut.

Material Oder-No.
PP 9072
ALU  9073
Stainless steel 9074

Stainless steel hose clamp

for secure fixing of hose at hose barb.

DW Oder-No.
¾”, 1″ oder 1¼” 9004

Safety clamp made of tool steel

for a secure fixing of barrel pump in open containers and open drums.

  Oder-No.
  9005

Emission proof drum adapter

for pump tube diameter 41 mm, FKM-seals, thread 2″. Prevent emission of harmful gases and vapours out of the drum. A vacuum in drum is equalized by a valve.

Material Oder-No.
Polypropylene 9024
Stainless steel 316Ti 9226

Screw cap for IBC

IG 2″, optional with barrel adapter PP Ø 41 mm

  Oder-No.
IBC DN 225 (black) 9071
IBC DN 150 (red) 9071a
IBC DN 225 (green) 9071b
IBC DN 150 (green) 9071c
Barrel adapter PP 9001

Wall hanger for drum pumps

for a secure storage of drum pumps when out of operation and for protection against damage.

  Oder-No.
  9006

Strainer for protection the barrel pump when abrasive particles are present.

Polypropylene
size of slots 1,5 x 12 mm, tube-Ø 40, 41 or 42 mm

Stainless steel
316Ti size of slots 1,5 x 20 mm, tube-Ø 41 mm

PVDF
size of slots 1,5 x 12 mm, tube-Ø 41 mm

Material Oder-No.
Polypropylene 9011
Stainless steel 316Ti 9012
PVDF 9230
Zapfpistole PP Nw 1

Nozzle made of polypropylene

Housing and internal parts made of polypropylene, valve seat and O-rings made of FKM or EPDM, spring of hastelloy 2.4610, rotatable hose connection.

Flow rate: 80 l/min*
Viscosity: 800 mPas*
Operating pressure: 3 bar*
Weight: 210 g

DW Order-No.
FKM ½” 9101
FKM ¾” 9102
FKM 1″ 9103
FKM IG 1″ 1168 + 9120
EPDM ½” 9104
EPDM ¾” 9105
EPDM 1″ 9106
EPDM IG 1″ 1168 + 9121

Nozzle made of PVDF

Housing and internal parts made of polypropylene, valve seat and O-rings made of FKM or EPDM, spring of Hastelloy 2.4610, rotatable hose connections.

Flow rate: 80 l/min*
Viscosity: 800 mPas*
Operating pressure: 3 bar*
Weight: 210 g

DW Order-No.
FKM ½” 9107
FKM ¾” 9108
FKM 1″ 9109
FKM IG 1″ 1169 + 9122
EPDM ½” 9110
EPDM ¾” 9111
EPDM 1″ 9112
EPDM IG 1″ 1169 + 9123
FFKM ½” 9113
FFKM ¾” 9114
FFKM 1″ 9115
FFKM IG 1″ 1169 + 9116

Manual nozzle made of polypropylene with outlet spout Ø 25 mm

Housing and internal parts made of white polypropylene, valve seat and O-rings made of NBR, spring made of stainless steel.

Flow rate: 100 l/min*
Viscosity: 800 mPas*
Operating pressure: 2 bar*

DW Order-No.
NBR ¾” 9117
NBR 1″ 9118

* Test media water 20°C, 2 m horizontal pressure pipe 1″, oval gear meter 1″, measured values: ± 5%

Manual nozzle made of polypropylene for AdBlue, with stainless steel outlet spout in Ø 19 mm

Housing and internal parts made of white polypropylene, valve seat and O-rings made of FKM, spring made of stainless steel.

Flow rate: 100 l/min*
Viscosity: 800 mPas*
Operating pressure: 2 bar*

DW Order-No.
FKM ¾” 9115
FKM 1″ 9115b

Automatic nozzle made of stainless steel for AdBlue, with a outlet spout in Ø 19 mm, swivel hose connection

Housing and internal parts made of stainless steel, valve seat and O-rings of FKM, spring of stainless steel.

Flow rate: 80 l/min*
Viscosity: low
Operating pressure: 3,4 bar*

DW Order-No.
FKM ¾”
9124
FKM 1″ 9125

Nozzle made of nickel-plated brass, PTFE seals, rotatable hose connection

For filling and transferring neutral and aggressive media and liquids, also in the field of pharmaceutical and the food industry. Housing and internal parts are made, of nickel-plated brass. Seals made of PTFE.

Flow rate: 80 l/min*
Viscosity: 750 mPas*
Operating pressure: 4 bar*
Temperature: max. 80°C*
Weight: 1 kg*
Various connection options
(Hose connection, thread)

DW Order-No.
¾” 9041
1″ 9042
1¼” 9043
AG ¾” 9044
AG 1″ 9045
AG 1¼” 9046

* Test media water 20°C, 2 m horizontal pressure pipe 1″, oval gear meter 1″, measured values: ± 5%

Nozzle made of stainless steel 316Ti

for use in chemical, pharmaceutical and food-industry. Housing and inner parts of stainless steel, seals of PTFE.

Flow rate: 80 l/min*
Viscosity: 750 mPas*
Operating pressure: 4 bar*
Temperature: max. 80°C*
Weight: 1 kg*

DW Order-No.
1″ 9013
AG 1″ 9013a

Nozzle made of Aluminium

for diesel, female thread, suitable to discharge hose male thread.

Flow rate: 60 l/min*

DW Order-No.
Nozzle with IG 1″ 9032
Hose connectiion ALU ¾” 9032a
Hose connection ALU 1″ 9032b

Clamping flange made of polypropylene

for IBC-Container (to fix a pump with Ø 40/41 mm), Ø 140 mm, 4-holes, screw-hole circle 115 mm.

  Order-No.
  9070

* Test media water 20°C, 2 m horizontal pressure pipe 1″, oval gear meter 1″, measured values: ± 5%

Explosion proof plug – Explosion proof socket

Ex de IIC T6, protection class IP 65, 16 Ampere

CEE-round plug Order-No.
3-pole 5055
5-pole 5056
CEE-round socket Order-No.
5-pole 5057
5-pole 5058

Electronic flowmeter of stainless steel

on both sides female thread 1″, ATEX.

Electronic turbine-wheel flowmeter, reset-table display for subset, flow volume in l/min, non resettable total amount.

Flow range: 19 l/min to 190 l/min*
Life time of battery: app. 2.000 h
Accuracy: ± 1%
Materials: Stainless steel housing, all parts that will get in contact with medium are made of stainless steel, PVDF, ferrit, wolfram-carbide, ceramic and rubber.

  Order-No.
Electronic flowmeter 9008

Mechanical flowmeter K33/K44

made of Alu/plastic, ca. 20–120 l/min*, 10 bar*, on both sides fem. threads 1″, for viscosities from 30–2000 mPas*, especially suitable for lubricants, heating oil/diesel, anti freezing liquid (undiluted) and vegetable oils (different flowmeters!).

  Order-No.
Display 3 digits 9035
Display 5 digits 9036

* Test media water 20°C, 2 m horizontal pressure pipe 1″, oval gear meter 1″, measured values: ± 5%

Electronic flowmeter

uncalibrated oval gear meter made of Alu.

Version Order-No.
Oil, ¾” IG
6-60 l/min, 70 bar
9037
Diesel, 1″ IG
10-100 l/min, 30 bar
9038
Oil + Diesel, 1½” IG
50-150 l/min, 20 bar
9039

Reduction unit in stainless steel

Connection Order-No.
1″ auf ¾” IG 9037
1¼” auf 1″ IG 9038
1½” auf 1″ IG 9039

Double nipple in stainless steel

Connection Order-No.
¾” to ¾” IG 9204
1″ to 1″ IG 9205
1″ to ¾” IG 9206
1¼” to 1″ IG 9207
1½” to 1″ IG 9208
IG: Internal thread
AG: External thread

Electronic flowmeter

FM 120, housing of PP or PVDF, outer thread G 1″, seal of FKM
Measuring principle: Turbine meter
Viscosity: 20 mPas*
Flow rate: 20–120 l/min*

Versions:

FM 120 Standard version

FM 120 M01, as the standard version but with quantity preset and switch output open drain, incl. 1 m cable with three-pole diode plug for controlling a pump or for opening and closing of a magnetic valve. This counter can be combined either with a special barrel pump motor, or the remote control switch (see below 9028).

FM 120 I, as the standard version but with pulse output, incl. 1 m three-wire cable without a plug. Quadrature signal, open drain.

Version Order-No.
FM120 PP 9020
FM120 PP M01 9020a
FM120 PP I 9020b
FM120 PVDF 9021
FM120 PVDF M01 9021a
FM120 PVDF I 9021b

Electronic kit for quantity preset
for installation in the motor handle or in a plug housing (without mounting).

  Order-No.
Electronic kit 9027

Remote switch in the plug housing
for controlling a pump or a magnetic valve with integrated electronics.

  Order-No.
Remote switch 9028

Fittings of polypropylene for counter FM 120 PP.

Version Order-No.
Counter – Pump tube
(IG 1″ to IG 1¼”)
1111
+ 1 Seal
of PTFE Ø 30 mm
2194
+ 1 Seal
of PTFE Ø 40 mm
2195
Counter – PP nozzle
(IG 1″ to IG 1″)
1109
+ 2 Seals
of PTFE Ø 30 mm
2194
Hose connector (IG 1″ to hose connector 1″) 1107
+ 1 Seal
of PTFE Ø 30 mm
2194