OUR HAND PUMPS
Our hand pumps are equipped with a 2″ male thread drum adapter (at some pumps it can be ordered as an accessory) and can be mounted in every 60 and 200 liters of standard steel drums. For plastic canisters and plastic drums there are nine different thread adapters upon request available. We will be glad to help you to make the right choice!





MANUAL HAND PUMPS

For a safe and convenient emptying of drums and containers we also offer a complete series of manual hand pumps:

Hand pumps are pumps that are manually operated by hand. Depending on the medium different materials of the pump and of the seals are available. In principle the hand pumps by JESSBERGER can be divided into three groups: for mineral oil products, for chemicals / cleaning solutions and flammable media like gasoline or solvents.

The illustrated hand pumps can be used for 200 liter drums and smaller containers. But if you ever need to remove small quantities of media out of of an IBC we can extend the suction tube at several plastic hand pumps up to 1200 mm pump tube length.

JP 02 Gelb Large

Hand pumps JP-02 for acids, alkalies and water-based chemicals.

Pump material: Polypropylene
Shaft: Stainless steel 304
Seals: FKM
Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on lever position
Pump tube length: 340–900 mm
Pump tube diameter: max. 40 mm
Thread adapter: G 2″ and G 1½”

Order No.: 6002 0000

JP 03 Large

Hand pump JP-03 for oils, diesel, alcohol up to max. 50%, antifreeze liquid, water, etc.

Pump material: Polypropylene
Shaft: Tool steel
Seals: NBR
Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on lever position
Pump tube length: 340–900 mm
Pump tube diameter: max. 40 mm
Thread adapter: G 2″ and G 1½”

Order No.: 6003 0000

Hand pumps JP-04 for different media.

Pump material: Polypropylene
Shaft: Polypropylene
Seals: depending on the media
Flow rate: ca. 0,3 l/stroke*
Hose connection: ¾”
Pump tube length: 500–900 mm
Pump tube diameter: max. 34 mm
Thread adapter: G 2″

JP-04 YELLOW with FKM seals for aggressive media such as acids and alkalis

Order No.: 6004 0000

JP-04 BLUE with NBR seals for mineral oil products.

Order No.: 6004 0001

JP-04 RED with EPDM seals for alkaline media.

Order No.: 6004 0002

JP-04 BLUE / WHITE with fluoropolymer seals for liquid foods.

Order No.: 6004 0003

Stainless steel hand pump JP-05 for flammable media.

Pump material: Stainless steel 316Ti
Seal: PTFE
Flow rate: 0,3–0,6 l/stroke*
Pump tube length: 700, 1000 and 1132mm
Pump tube diameter: 32 mm

Suitable for flammable liquids such as solvents (including acetone)
Certified: risk analysis made by TUEV Munich.

Necessary accessories:

Discharge arc with PTFE seal and wing nut

Hose connection made of stainless steel ¾ or 1″, with PTFE seal and wing nut made of brass, nickel plated

Drum adapter made of brass nickel plated R2″ with fixing device

Anti-static set consisting of 4 copper cables (absolutely
necessary when pumping flammable liquids)

Order No.:
700 mm 6005 0700 

700 mm Ex 6005 700

1000 mm 6005 1000
1000 mm Ex 6005 1000
1132 mm 6005 1200
1132 mm Ex 6005 1200

Handpumpe Jp 06 Large 1

Plastic hand pump JP-06 suitable for water, slightly aggressive acids and alkalies.

Pump material: Polyethylene and PVC
Flow rate: 0,08 l/pumping process and 20 l/min at an independent transferring*
Pump tube length: 850 mm
Pump tube diameter: 25 mm
Thread adapter: G 2″

Hand pump complete with 130 cm long discharge hose and drum adapter G 2″.

This hand pump is designed as a siphon pump. After the suction pipe and discharge hose arc had been filled manually the pump works independently.

Order No.: 6006 0000

Handpumpe Jp 07 St 5

Handpumpe JP-07, manuelle Abfüll- und Transferpumpe für 20 l Kanister bis 200 l Fässer.

Pump body: made of polypropylene, internal parts also made of stainless steel
Seal: acc. media
Flow rate: Water: 20 l/min*, Oil SAE 30: 9 l/min. at 20°C*
Pump tube length: Suction pump consisting of four parts, each 250 mm
Pump tube diameter: max. 31 mm
Rubber adapter: for bung hole diameters from 46,5 to 60 mm
Temperature: 40°C*
Viscosity: 400 mPas*

By pumping movement pressure can be generated in a barrel or canister. After this pressure has been build, the medium flows out independently after opening the filling tap, so that a certain quantity can be filled by the tap.

Three adapters for bunghole diameters of 46.5 to 60 mm are included.

JP-07 BLUE with NBR seals for the transfer of oily substances and petroleum-based products.

Order No.: 6007 0001

JP-07 RED with EPDM seals for the transfer of basic media. Attention: the internal parts of the hand pump are also made of stainless steel.

Order No.: 6007 0002

JP-07 GREEN with FKM seals for light acids and chemicals. Attention: the internal parts of the hand pump are also made of stainless steel.

Order No.: 6007 0003

Optional accessories for hand pumps JP-07:
Transverse hose (1.5 m) incl. tap

JP 08 Large

Hand-crank rotary pump JP-08 for chemi­cals. The pump is suitable for thin fluid, highly aggressive media such as acids and alkalies.

Pump material: PVDF
Seals: PTFE
Flow rate: 0,3 l/rotation*
Pump tube length: 3 x 35 cm

Pump complete with discharge arc and drum adapter G 2″.
Regular lubrication required.

Order No.: 6008 0000

Handpumpe Jp 09 Large

Hand pumps JP-09 suitable for almost all highly liquid and slightly aggressive media such as acids, alkalis and chemicals. Better resistance as JP-02 due PP-sheathed shaft.

Pump material: Polypropylene
Seals:
FKM
Flow rate:
0,5 l/stroke*
Telescopic suction tube: 3 parts, polyethylene
Suction depth:
for containers to 960 mm
PE hose: 2 m
Weight: 1.2 kg

Thread G 2″ for screwing in standard barrels.

Adapters available for plastics drums and cans of 60-220 l.
Outlet piece DN 19, 3/4″.

The pump is not to be used for pumping media of hazard classes AI / AII, other flammable media or in an explosive environment.

Order No.: 6009 0000

Handpumpe Jp 11 Large

Hand-crank rotary pump JP-11 suitable for thin fluid, non-flammable liquids such as diesel, gear oil, heating oil, hydraulic oil, machine oil, mineral oil, motor oil, etc. up to 1000 mPas.

The pump is not suitable for water.

Pump material: Aluminium and zinc plated steel
Seals: NBR
Flow rate: 1 l/rotation*, changing from forward to reverse transferring possible. Thus results an optimal dosing.
Pump tube length: 1,080 mm
Pump tube diameter: 53 mm (sieve)
Head: 15 m*
Horizontal distance: 50 m*

Pump complete with discharge hose and drum adapter G 2″.

Order No.: 6011 0000

Handpumpe Jp 12 Large

Hand-crank rotary pump JP-12 suitable for thin fluid, non-flammable liquids such as diesel, gear oil, heating oil, hydraulic oil, machine oil, mineral oil, motor oil, etc. up to 1000 mPas.

The pump is not suitable for water.

Pump material: Aluminium and zinc plated steel
Seals: NBR
Flow rate: 1 l/rotation*, changing from forward to reverse transferring possible. Thus results an optimal dosing.
Pump tube length: 1,080 mm
Pump tube diameter: 53 mm (sieve)
Head: 15 m*
Horizontal distance: 50 m*

Pump complete with special mineral oil hose 2000 mm, discharge arc and drum adapter G 2″.

Order No.: 6012 0000

Compact hand crank rotary pump JP-13 suitable for diesel, heating oil, oils (up to SAE 90) and all other self-lubricating, non-aggressive and non-flammable media.

Pump material: Die casting and plastics
Seals: NBR
Flow rate: 0,3 l/stroke* | up to 18 l/min
Pump tube diameter: max. 40 mm
Strainer diameter:
max. 30 mm
Telescopic suction tube:
adjustable from 355 – 955 mm. Suitable for smaller containers and 200 liter drums.
Pump complete with discharge arc, drum adapter G 2″ and strainer.

Order No.: 6013 0000

Handpumpe Jp 15 Large

Stainless steel hand pump JP-15 for transferring many thin fluid, non-flammable media such as diesel, oils, anti freezing liquid, etc.

Material: Steel zinc plated
Seals: NBR
Flow rate: 0,35 l/stroke*
Pump tube length: 450–865 mm
Pump tube diameter: 40 mm

The telescopic suction tube enables an universal use for all barrel sizes.

G 1½” and G 2″ drum adapter pump with discharge arc. The outlet has a ¾” – thread. Therefore other connection options exist.

Order No.: 6015 0000

Handpumpe Jp 16 1

Fire brigade hand pump JP-16, ATEX compliant, single-acting hand pump that can be used for following media of hazard classes A I-III:

Diesel, heating oil, fuel, petroleum, anti freezing liquid for cooler (undilated), thin fluid mineral oils and rapeseed methyl ester.

Execution for fire brigade with flexible suction hose instead of a rigid tube.

Suction hose DN 19 x 4; 1,5 m
Discharge hose DN 19 x 4; 1,5 m
Flow rate: app. 0,25 l/stroke*

In pump housing integrated drum adapters with M 64×4 and G 2″ enable an easy fixing in drums.

Order No.: 6016 0000

JP 111 Nw Large

Battery driven pump JP-111, suitable for water, diesel, lightly oils, neutral, lightly aggressive and non flammable media. Only suitable for short-term operation.

Pump material: PP, PE and ABS
Flow rate: 8 l/min*
Pump tube length: 460 mm
Largest suction tube diameter: 33 mm
Discharge hose: 600 mm

Driven by batteries, size D, 1,5 V (not included in price)

Order No.: 6111 0000

* All specified values are maximum values.
The flow rate of the pump refers to water at 20°C, measured values: ± 5%.