-
Magnetic centrifugal pumps principle
- Magnetic centrifugal pumps JP-860
MAGNETIC CENTRIFUGAL PUMPS JP-860
The separation of liquid chamber/atmosphere by means of an isolation shell is the best solution to pump aggressive chemical, high purity liquids and liquids difficult to seal.
Hermetic sealless injection moulded thermoplastic pumps are the best solution for light duty applications.
Casing and impeller in PP and PVDF suitable for a wide variety of media.
Other materials and performance on request.
Magnetic centrifugal pumps JP-860.40
Technical data:
Specific gravity table:
Motor specification:
Material - Composition:
Technical data:
| Inlet connections | 1″ F |
| Outlet connections | 1/2″ M |
| Max. Flow rate | 3,5 m³/h |
| Max. Delivery head | 7,5 m |
| Max. Viscosity | 100 mPas |
| Max. Temperature |
PP -5 °C +65 °C |
| Max. Temperature |
PVDF -20 °C +90 °C |
| Impeller | closed |
| Dimensions mm |
114 x 136 without motor |
Specific gravity table:
| Impeller | 0,12 Kw |
| Ø 78 mm | up to 1,1 |
| Ø 68 mm | up to 1,3 |
| Ø 58 mm | up to 1,5 |
Motor specification:
| Size | Kw | RPM |
| IEC 56 | 0,12 | 2 poles – 2900 |
Material - Composition:
| Casing | O-ring | Shaft + Bushing | Impeller |
| P = PP K = PVDF |
D = EPDM V = VITON |
TA = PTFEC + ALLUMINA 99,7% |
78 = Ø 78 mm STD 68 = Ø 68 mm 58 = Ø 58 mm |
| Connections | Motor | Motor power | |
| 1 = BSP STD 2 = FLANGED |
IE = 3PH STD X = ATEX 1P = 1PH STD – = NO MOTOR |
0,12 = 0, 12 Kw STD |
Magnetic centrifugal pumps JP-860.60
Technical data:
Specific gravity table:
Motor specification:
Material - Composition:
Technical data:
| Inlet connections | G 1″ F |
| Outlet connections | G 3/4″ M |
| Max. Flow rate | 7 m³/h |
| Max. Delivery head | 8,5 m |
| Max. Viscosity | 150 mPas |
| Max. Temperature |
PP -5 °C +65 °C |
| Max. Temperature |
PVDF -20 °C +90 °C |
| Impeller | closed |
| Dimensions mm |
143 x 154 without motor |
Specific gravity table:
| Impeller | 0,25 Kw | 0,37 Kw |
| Ø 81 mm | up to 1,1 | up to 1,5 |
| Ø 70 mm | up to 1,3 | up to 1,8 |
| Ø 65 mm | up to 1,5 | up to 2,0 |
Motor specification:
| Size | Kw | RPM |
| IEC 63 | 0,25 | 2 poles – 2900 |
| IEC 63 | 0,37 | 2 poles – 2900 |
Material - Composition:
| Casing | O-ring | Shaft + Bushing | Impeller |
| P = PP K = PVDF |
D = EPDM V = VITON |
TA = PTFEC + ALLUMINA 99,7% |
81 = Ø 81 mm STD 70 = Ø 70 mm 65 = Ø 65 mm |
| Connections | Motor | Motor power | |
| 1 = BSP STD 2 = FLANGED |
IE = 3PH STD X = ATEX 1P = 1PH STD – = NO MOTOR |
0,25 = 0,25 Kw STD 0,37 = 0,37 Kw STD |
Magnetic centrifugal pumps JP-860.100
Technical data:
Specific gravity table:
Motor specification:
Material - Composition:
Technical data:
| Inlet connections | G 1 1/2″ F |
| Outlet connections | G 1″ M |
| Max. Flow rate | 13 m³/h |
| Max. Delivery head | 14 m |
| Max. Viscosity | 200 mPas |
| Max. Temperature |
PP -5 °C +65 °C |
| Max. Temperature |
PVDF -20 °C +90 °C |
| Impeller | closed |
| Dimensions mm |
180 x 171 without motor |
Specific gravity table:
| Impeller | 0,55 Kw | 0,75 Kw |
| Ø 98 mm | up to 1,1 | up to 1,3 |
| Ø 85 mm | up to 1,5 | up to 1,8 |
| Ø 70 mm | up to 1,8 | up to 2,0 |
Motor specification:
| Size | Kw | RPM |
| IEC 71 | 0,55 | 2 poles – 2900 |
| IEC 71 | 0,75 | 2 poles – 2900 |
Material - Composition:
| Casing | O-ring | Shaft + Bushing | Impeller |
| P = PP K = PVDF |
D = EPDM V = VITON |
TA = PTFEC + ALLUMINA 99,7% |
98 = Ø 98 mm STD 85 = Ø 85 mm 70 = Ø 70 mm |
| Connections | Motor | Motor power | |
| 1 = BSP STD 2 = FLANGED |
IE = 3PH STD X = ATEX 1P = 1PH STD – = NO MOTOR |
0,55 = 0,55 Kw STD 0,75 = 0,75 Kw STD |
Magnetic centrifugal pumps JP-860.150
Technical data:
Specific gravity table:
Motor specification:
Material - Composition:
Technical data:
| Inlet connections | G 2″ F |
| Outlet connections | G 1 1/4″ M |
| Max. Flow rate | 23,5 m³/h |
| Max. Delivery head | 20 m |
| Max. Viscosity | 200 mPas |
| Max. Temperature |
PP -5 °C +65 °C |
| Max. Temperature |
PVDF -20 °C +90 °C |
| Impeller | closed |
| Dimensions mm |
231 x 205 without motor |
Specific gravity table:
| Impeller | 1,1 Kw | 1,5 Kw |
| Ø 123 mm | up to 1,0 | up to 1,1 |
| Ø 108 mm | up to 1,2 | up to 1,5 |
| Ø 90 mm | up to 1,5 | up to 1,8 |
Motor specification:
| Size | Kw | RPM |
| IEC 80 | 1,1 | 2 poles – 2900 |
| IEC 80 | 1,5 | 2 poles – 2900 |
Material - Composition:
| Casing | O-ring | Shaft + Bushing | Impeller |
| P = PP K = PVDF |
D = EPDM V = VITON |
TA = PTFEC + ALLUMINA 99,7% |
123 = Ø 123 mm STD 108 = Ø 108 mm 90 = Ø 90 mm |
| Connections | Motor | Motor power | |
| 1 = BSP STD 2 = FLANGED |
IE = 3PH STD X = ATEX 1P = 1PH STD – = NO MOTOR |
0,55 = 0,55 Kw STD 0,75 = 0,75 Kw STD |
Magnetic centrifugal pumps JP-860.300
Technical data:
Specific gravity table:
Motor specification:
Material - Composition:
Technical data:
| Inlet connections | G 2″ F |
| Outlet connections | G 1 1/2″ M |
| Max. Flow rate | 35 m³/h |
| Max. Delivery head | 24 m |
| Max. Viscosity | 200 mPas |
| Max. Temperature |
PP -5 °C +65 °C |
| Max. Temperature |
PVDF -20 °C +90 °C |
| Impeller | closed |
| Dimensions mm |
278 x 230 without motor |
Specific gravity table:
| Impeller | 2,2 Kw | 3,0 Kw |
| Ø 134 mm | up to 1,1 | up to 1,3 |
| Ø 122 mm | up to 1,3 | up to 1,5 |
| Ø 110 mm | up to 1,8 | up to 2,0 |
Motor specification:
| Size | Kw | RPM |
| IEC 90 | 2,2 | 2 poles – 2900 |
| IEC 90 | 3,0 | 2 poles – 2900 |
Material - Composition:
| Casing | O-ring | Shaft + Bushing | Impeller |
| P = PP K = PVDF |
D = EPDM V = VITON |
TA = PTFEC + ALLUMINA 99,7% |
134 = Ø 134 mm STD 122 = Ø 122 mm 110 = Ø 110 mm |
| Connections | Motor | Motor power | |
| 1 = BSP STD 2 = FLANGED |
IE = 3PH STD X = ATEX 1P = 1PH STD – = NO MOTOR |
2,2 = 2,2 Kw STD 3,0 = 3,0 Kw STD |
