-
Magnetic centrifugal pumps principle
- Magnetic centrifugal pumps JP-860
System parts magnetic centrifugal pumps
The magnetic centrifugal pump, which is precisely manufactured from high-quality materials, ensures a reliable and long service life.
Installation - Positive suction:
The centrifugal pumps should only be installed with the shaft positioned horizontally in a positive suction head arrangement. Suitable devices should be fitted to prevent dry running and the formation of a vortex and possible air suction.
Magnetic centrifugal pumps
The magnetic centrifugal pump is especially suitable for high aggressive media like acids and alkalies.
The separation of liquid chamber/atmosphere by means of an isolation shell is the best solution to pump aggressive chemical, high purity liquids and liquids difficult to seal.
Hermetic sealless injection moulded thermoplastic pumps are the best solution for light duty applications.
Magnetic drive centrifugal pumps series JP-860 are made of Polypropylene and PVDF, and are suitable for high corrosive liquids.
Thanks to the innovative magnetic drive system, series JP-860 reduce the risks of leakage and emissions and the maintenance costs.
The transmission of the motion occurs through magnetic joints without any mechanical seal and this design guarantees the maximum safety and efficiency.
The pumped liquid has to be clean and without solids in suspension.
Main Features of magnetic centrifugal pump
Casing and impeller in PP and PVDF.
O-ring in EPDM and VITON®.
ALLUMINA + PTFEC 99,7% (standard).
Max. flow rate: 35 m3/h.
Max. delivery head 25 m
Temperature: from -5 °C to + 90 °C
Max viscosity: 200 mPas
Max. system pressure: 5 bar.
Electric motors from 0,12 kW up to 3,0 kW
Specific gravity up to 2.0
Simple system
Few components (extremely easy maintenance),
competitive prices, guaranteed chemical
compatibility.
| Material | PP/PVDF |
| Flow rate | 40 l/m³/h |
| Head | 25 m |
| Viscosity | up to 200 mPas |
| Temperature | up to PP: -5 °C +65 °C up to PVDF: -10 °C +90 °C |
| Supply of the pumping medium required (no self-priming pumps) | |
| Electric motors from 0,12 kW up to 3,0 kW | |
| * All physical values are maximum values. The flow rate refers to water at 18°C and was measured at the pump pressure port. |
|
