DOSING PUMPS JP-7032-7120.2

MEDIA
CHEMICAL PRODUCTS: Paints • Varnishes • Soaps • Synthetic Resins • Latex • Silicone Compounds • Polymers • etc.

MINERAL OIL PRODUCTS: Oils • greases • cutting oils • coolants • etc.

FOOD: Tomato paste • Ketchup • Jam • Honey • Fruit juices • Concentrates • Grapes • Mashes • Fruit pulps • Dairy products • Chocolate mass • Dough • Pectin • etc.

COSMETICS / PHARMACEUTICAL INDUSTRY: Laundry Detergent • Liquid Soap • Glycerin • Lotions • etc.

for thin fluid to high viscous media

Type JP-7032 up to JP-7120.2. Almost pulsation free transport and small quantity dosing of thin to high viscous, thixotropic, gaseous, solids and fibres containing, aggressive and neutral media in nearly all industries.

High dosing precision

Flow rate adjustable by the speed of the motor

Stainless steel execution SS 316Ti

Pump and motor directly coupled

Space-saving design

Flow rates from 0,6 up to 1200 l/h

Pressure stages 6, 12, 18 and 24 bar

Thread connections on suction side G 1” and G ½” on discharge side G 1”

Totally enclosed pin joints

Rotor SS 316Ti

Stator material adapted to the pumped medium (NBR, NBR light, FKM and EPDM, EPDM light; PTFE is only available at types JP-7115.1 and JP-7115.2)

Shaft seal by single-acting mechanical seal or stuffing box

The JESSBERGER high viscosity dosing pumps are supplied as standard with either a for operation with frequency inverter drive suitable gear motor or with an adjustable manually control gear motor. The pumps currently do not yet have ATEX approval and should therefore not be used for pumping flammable media.

Dosing pumps

MOTORS JP-7032-7120.2

Type series JP-7032 to 7120.2 is supplied with two different drives.

Gear motor, suitable for use with frequency inverter.

Between 12 and 100 Hz, 230/400 V, 50 Hz, IP 55, B3/B5, flange 120 mm, Iso class F, thermo sensors 3 x 155°C

Power 0,37 kW up to 1,1 kW

Frequency inverter for installation in switchboard, with operating terminal, single phase AC connection 1 x 230 V, 50/60 Hz

Frequency inverter on gear motor, speed control by potentiometer or operating terminal, 3 x 230/400 V, 50/60 Hz

Gear motor, adjustable via hand.

0,37 kW and 1,1 kW stepless variable from 0 to 1200 rpm.