Pumps – Drum pumps overview – Pump tubes for drum pumps – Mixing pump tubes

MIXING PUMP TUBES MADE OF POLYPROPYLENE OR STAINLESS STEEL

MEDIA
Polypropylene: Formic acid (50%) • Ammonia • Boric acid • Distilled water • Fertilizer solutions • Iron II and III-chloride • Acetic acid (80%) • Photo developer • Fruit acids • Potassium hydroxide solution • Copper chloride • Lactic acid • Sodium hydroxide solution • Phosphoric acid • Hydrochloric acid • Sulfuric acid up to (90%) • Hydrogen peroxide • Citric acid and many other media.

Stainless steel: Acetone • Alcohol • Ammonia • Gasoline • Flammable solvents • Potassium hydroxide solution • Sodium hydroxide solution • Nitrovarnishes • Perchlorethylene • Phosphoric acid • Sulfuric acid (up to 7.5% and over 90%) • Trichlorethylene • Toluene and many other media.

In addition the stainless steel pump tubes are suitable for transferring thin fluid food such as fruit juices, milk, edible oils and all other at aluminium pump tubes mentioned media.

Mixing pump tube made of Polypropylene or Stainless steel​

Drive shaft: Hastelloy 2.4610 or Stainless steel 316Ti.
Double function mixing and transferring.

for mixing or emptying drums and IBC´s​

Mixing pump tubes made of Polypropylene (PP)

Mixing pump tubes are suitable for those applications where low viscous to slightly viscous media must be mixed in drums and other containers and after that pumped out.

The mixing pump tubes made of polypropylene with a shaft of hastelloy are used especially for aggressive media like acids and alkalies.

Mixing pump tube made of polypropylene (Mix PP), sealless construction with double function mixing and pumping.

Suction tube length 1,000/1,200 mm, suction tube diameter 50/41 mm.

Drive shaft in hastelloy 2,4610.

Hose connection 1″ included (¾” or 1¼” also possible).

The suction tube length of 1,000 mm is suitable for mixing and transferring media out of 200-liter drums.

The suction tube length of 1,200 mm is the right choice for circulating media in containers and to empty the containers.

The motors JP-180, JP-280, JP-360 and JP-380 and the air operated motors have proven themselves well as drives for the mixing pump tubes.

Mixing pump tubes made of stainless steel are used primarily for neutral, slightly aggressive and flammable media. The pump tubes are approved for use in Ex-zone 0. They fulfill all national and international standards for pumping flammable media and here especially the ATEX directives.

Mixing pump tube made of stainless steel 316Ti (Mix SS) sealless construction with the double function mixing and pumping.

Approved for pumping flammable liquids as paints and varnishes!

Suction tube length 1,000/1,200 mm, suction tube diameter 50/41 mm.

Drive shaft in stainless steel 316Ti.

Hose connection 1″ included (¾” or 1¼” also possible).

The suction tube length of 1,000 mm is suitable for mixing and transferring media out of 200-liter drums.

The suction tube length of 1,200 mm is the right choice for circulating media in containers and to empty the containers.

The motors JP-180, JP-280, JP-360 and JP-380 as well as in hazardous areas the electric motors JP-400, JP-460, JP-480 and the air operated motors have proven well themselves as drives for the mixing pump tubes.

EC type examination certificate number ZELM 09 ATEX 0424X.

Atex
Made in Germany
TÜV