AIR OPERATED MOTOR JP-AIR1
Air operated motor JP-AIR1
This regulates speed of the motor and varies pumping capacity.
300 Watt, max operating pressure 6 bar
The drive JP-AIR 1 is a compactly built, elegant designed air operated motor with an aluminium housing.
The lightweight, handy and powerful device can be used as drive for the laboratory and drum pump tubes and is suitable in this combination for many thin liquid, neutral and aggressive media. Flammable media are not allowed to be transferred with the laboratory pump tubes made of stainless steel cause of missing ATEX certification. The sophisticated, technically clear structure ensures an efficient and safe use when transferring various media.
The air operated drum pump motor is characterized beside its light weight (2 kg) by its ease of use. The non-stationary and stationary usable drive is particularly suitable for intermittent operation.
Via the included ball valve the compressed air can be dosed at the air inlet, and thereby the rotational speed of the motor. Therefore the flow rate of the pumped media can be adjusted to the users requirements.
The maximum operating pressure is 6 bar. The included silencer ensures a low noise level. The air consumption of the engine is under load 13 l/sec.
The maximum density of the media is for the air operated motor JP-AIR 1 1.3, the maximum viscosity 400 mPas.
| Specifications JP-140 | |
|---|---|
| Flow rate (with hose and oval gear meter) | Ø 25 mm up to 18 l/min* Ø 28 mm up to 33 l/min* Ø 32 mm up to 42 l/min* |
| Head | Ø 25 mm up to 5 m* Ø 28 mm up to 6 m* Ø 32 mm up to 8 m* |
| Viscosity | up to 400 mPas* |
| Density | up to 1,3* |
|
* All physical data are real measured maximum values. |
|
Flow charts JP-AIR1
| Motor without pump tube | |
|---|---|
| Version |
Order No. |
| 300 W | 3001 0300 |
| 300 W at 6 bar operating pressure | |
| Air consumption under load 13 l/sec. | |
