DRUM PUMP SETS STAINLESS STEEL FOR FOOD
From JESSBERGER are the perfect assistents for fast and safe filling and transferring or emptying of drums and containers.
Drum pump-Sets Stainless steel suitable for thin-viscous foods like malic acid, pineapple juice, protein solutions, dextrose (grape sugar), juice, oils, cider, etc.
Drum pump, hose and pump nozzle were perfectly matched based on our decades of experience and guarantee therefore an immediate usability and durability of our drum pumps.
Each of our drum pump sets consists of an electric or air operated drum pump motor, a pump tube suitable for the application, two meter media-proof dispensing hose and a nozzle, which facilitates filling and transferring.
Outside of hazardous areas you can combine each pump tube with each drum pump motor and corresponding accessories and therefore select the a individual drum pump set from JESSBERGER.
Drum pump set with electric motor for media with higher viscosity
JP-280 PP (HC) Universal motor 230 or 115 V, 50/60 Hz, 825 W, splash protection to IP 24, double insulated class II, over load protection switch with low voltage release, 5 m cable with plug.
Pump tube:
Stainless steel 316Ti, outer-Ø 41 mm,
shaft stainless steel,
Connection thread G 1¼”
Hose connection 1″ (DN 25)
2 m PVC hose 1″ (DN 25)
2 Hose clamps stainless steel
1 Nozzle polypropylene 1″
| Operating data JP-280 | |
|---|---|
| Flow rate (with hose and oval gear meter) | Ø 41 mm up to 112 l/min* (Rotor) |
| Head | Ø 41 mm up to 16 m* (Rotor) |
| Viscosity | up to 1000 mPas* |
| Density | up to 1,9* |
| * All physical data are real measured maximum values. * Test medium water 20° C, 2 m pressure pipe 1″, oval gear meter 1″, measured values: ± 5% Attention: When using a nozzle, the flow rate is reduced to app. 60-80 l/min (depends on the pump and application). |
|
| Length | Order-N°. |
|---|---|
| Set with pump tube 1000 mm | |
| 230 V | 1281 4116 |
| Set with pump tube 1200 mm | |
| 230 V | 1281 4126 |
Drum pump set with electric motor for media with higher viscosity
JP-280 PP (HC) Universal motor 230 or 115 V, 50/60 Hz, 825 W, splash protection to IP 24, double insulated class II, over load protection switch with low voltage release, 5 m cable with plug.
Pump tube:
Stainless steel 316Ti, outer-Ø 41 mm,
shaft stainless steel,
Connection thread G 1¼”
Hose connection 1″ (DN 25)
2 m Food grade hose 1″ (DN 25)
2 Hose clamps stainless steel
1 Stainless steel nozzle 1″
| Operating data JP-280 | |
|---|---|
| Flow rate (with hose and oval gear meter) | Ø 41 mm up to 112 l/min* (Rotor) |
| Head | Ø 41 mm up to 16 m* (Rotor) |
| Viscosity | up to 1000 mPas* |
| Density | up to 1,9* |
| * All physical data are real measured maximum values. * Test medium water 20° C, 2 m pressure pipe 1″, oval gear meter 1″, measured values: ± 5% Attention: When using a nozzle, the flow rate is reduced to app. 60-80 l/min (depends on the pump and application). |
|
| Length | Order-N°. |
|---|---|
| Set with pump tube 1000 mm | |
| 230 V | 1281 4115 |
| Set with pump tube 1200 mm | |
| 230 V | 1281 4125 |
