DRUM PUMP SETS FOR PVDF
From JESSBERGER are the perfect assistents for fast and safe filling and transferring or emptying of drums and containers
Drum pump set PVDF are especially suitable for highly aggressive liquids such as concentrated acids and bases.
Drum pump, hose and pump nozzle were perfectly matched based on our decades of experience and guarantee therefore an immediate usability and durability of our drum pumps.
Each of our drum pump sets consists of an electric or air operated drum pump motor, a pump tube suitable for the application, two meter media-proof dispensing hose and a nozzle, which facilitates filling and transferring.
Outside of hazardous areas you can combine each pump tube with each drum pump motor and corresponding accessories and therefore select the a individual drum pump set from JESSBERGER.
Drum pump set with electric motor for highly concentrated acids and alkalis
JP-280 PVDF Universal motor 230 or 115 V, 50/60 Hz, 825 W, splash protection to IP 24, double insulated class II, over load protection switch with low voltage release, 5 m cable with plug.
Pump tube:
PVDF outer-Ø 41 mm, HC-shaft 2,4610
Connection thread G 1¼”
Hose connection 1″ (DN 25)
2 m Multi purpose chemical hose 1″ (DN 25)
2 Hose clamps stainless steel
1 Nozzle PVDF 1″
| Operating data JP-280 | |
|---|---|
| Flow rate (with hose and oval gear meter) | Ø 41 mm up to 112 l/min* (Rotor) |
| Head | Ø 41 mm up to 16 m* (Rotor) |
| Viscosity | up to 1000 mPas* |
| Density | up to 1,9* |
| * All physical data are real measured maximum values. * Test medium water 20° C, 2 m pressure pipe 1″, oval gear meter 1″, measured values: ± 5% Attention: When using a nozzle, the flow rate is reduced to app. 60-80 l/min (depends on the pump and application). |
|
| Length | Order-No. |
|---|---|
| Set with pump tube 1000 mm | |
| 230 V |
1281 4112 |
| 115 V | 1282 4112 |
| Set with pump tube 1200 mm | |
| 230 V | 1281 4122 |
| 115 V | 1282 4122 |
Drum pump set with electric motor for neutral and aggressive media
JP-380 PVDF Universal motor 230 V, 50/60 Hz, 825 W, IP 55, protection class I, on/off switch, with low voltage release, 5 m cable with plug.
Pump tube:
PVDF outer-Ø 41 mm, HC-shaft 2,4610
Connection thread G 1¼”
Hose connection 1″ (DN 25)
2 m Multi purpose hose 1″ (DN 25)
2 Hose clamps stainless steel
1 Nozzle PVDF 1″
| Operating data JP-380 | |
|---|---|
| Flow rate (with hose and oval gear meter) | Ø 41 mm up to 112 l/min* (Rotor) |
| Head | Ø 41 mm up to 16 m* (Rotor) |
| Viscosity | up to 1000 mPas* |
| Density | up to 1,9* |
| * All physical data are real measured maximum values. * Test medium water 20° C, 2 m pressure pipe 1″, oval gear meter 1″, measured values: ± 5% Attention: When using a nozzle, the flow rate is reduced to app. 60-80 l/min (depends on the pump and application). |
|
| Length | Order-No. |
|---|---|
| Set with pump tube 1000 mm | |
| 230 V |
1383 4110 |
| Set with pump tube 1200 mm | |
| 230 V | 1383 4112 |
