DRUM PUMP SETS (PP) FOR ADBLUE®
From JESSBERGER are the perfect assistents for fast and safe filling and transferring or emptying of drums and containers.
Drum pump-Sets are particularly suitable for AdBlue®.
AdBlue® is a highly pure, colorless urea solution in demineralized water. Nitrogen emissions from exhaust gases are converted in an SCR catalytic converter in diesel-powered vehicles.
Reduction using a catalytic process reduces up to 90% of toxic nitrogen oxide emissions. This contributes to ensuring that the prescribed Euro standards IV and V are adhered to and that the water hazard class is 1, the lowest. DIN 70070 guarantees consistently high quality.
Many commercial vehicles such as trucks and buses have additional AdBlue® tanks. The requirement is around 5% of fuel consumption. AdBlue® can also be used in the car sector.
Drum Pump Set with electric motor for AdBlue®*
JP-180 PP (stainless steel) Universal motor 230 V, 50 Hz, 640 W, splash protection to IP 24, double insulated class II, over load protection switch with low voltage release, 5 m cable with plug.
Pump tube: Polypropylene,
outer-Ø 41 mm, stainless steel shaft
Connection thread G 1¼”
Hose connection 3/4″ (DN 19)
2 m PVC-Hose 3/4″ (DN 19)
2 Hose clamps stainless steel
1 Nozzle either suitable for trucks (spout pipe 19 mm) or cars (spout pipe 15.5 mm)
Operating data JP-180 | |
---|---|
Flow rate (with hose and oval gear meter) | Ø 41 mm up to 93 l/min* (Rotor) |
Head | Ø 41 mm up to 11 m* (Rotor) |
Viscosity | up to 600 mPas* |
Density | up to 1,5* |
* All physical data are real measured maximum values. * Test medium water 20° C, 2 m pressure pipe 1″, oval gear meter 1″, measured values: ± 5% Attention: When using a nozzle, the flow rate is reduced to app. 60-80 l/min (depends on the pump and application). *AdBlue® is a registered trademark of the Verband der Automobilindustrie e. V. (VDA) |
Length | Order-No. |
---|---|
Set with pump tube 1000 mm | |
Set with AdBlue® nozzle (car) |
2181 4111 |
Set with AdBlue® nozzle (truck) | 2181 4110 |