-
Small magnetic centrifugal pumps principle
- Magnetic centrifugal pumps Compact JP-860
Installation - Positive suction:
The centrifugal pumps should only be installed with the shaft positioned horizontally in a positive suction head arrangement. Suitable devices should be fitted to prevent dry running and the formation of a vortex and possible air suction.
Small magnetic centrifugal pumps
The centrifugal pumps are suitable for different media.
The compact pumps are single stage, centrifugal impeller and magnetic drive pumps.
The range includes five models to deliver flows from 11 lt/min to 50 lt/min.
Compact dimension, low noise, absence of seals device make the pumps ideal for application in any place or plant and can be incorporated into sophisticate equipment or “clean” environment.
The drive magnet, outside the casing and keyed on the spindle, drives the magnetic impeller inside the hermetic casing.
In this way, the traditional shaft seal and the consequent leakage problems are eliminated. So, there is no corrosion of the outer parts (motor and bearings) in the environment.
Components of compact magnetic centrifugal pump
Easy to maintain components, competitive prices, guaranteed chemical compatibility.
| Inlet connections | G 14 mm – 3/4″ F |
| Outlet connections | G 14 mm – 3/4″ M |
| Flow rate | 10 – 45 l/min |
| Delivery head | 1,5 – 5 m |
| Casing and impeller in | PP und PVDF |
| Shaft / Bearing |
Aluminiumoxid 99,7 % + PTFEC |
| O-ring |
EPDM und VITON® |
| Max. Viscosity | 20 mPas |
| Max. Temperature |
up to PP: -5 °C +65 °C |
| Max. Temperature | up to PVDF -10 °C +90 °C |
| Electric motors |
6 W to 65 W |
| |
Other materials and performance on request. |
