LABORATORY PUMP SETS SETS
From JESSBERGER are the perfect assistents for fast and safe filling and transferring or emptying of drums and containers
Laboratory pump, hose and pump nozzle were perfectly matched based on our decades of experience and guarantee therefore an immediate usability and durability of our laboratory pumps.
Each of our laboratory pump sets consists of an electric or air operated laboratory pump motor, a pump tube suitable for the application, two meter media-proof dispensing hose and a nozzle, which facilitates filling and transferring.
Laboratory pump set with electric motor for light acids and alkalis
Laboratory pump set JP-120 PP (HC), Ø 25 mm
Universal motor JP-120 230 V, 50/60 Hz, 250 W, protection class IP 24, double insulated category II, over load protection switch with low voltage release, thermo protection, 5 m cable and plug.
Pump tube:
Polypropylene, outer-Ø 25 mm, Hastelloy-shaft
Connection thread G 1″
Hose connection ½” (DN 13)
2 m PVC-Hose ½” (DN 13)
2 Hose clamps Stainless steel
1 Nozzle Polypropylene ½”
| Specifications JP-120 | |
|---|---|
| Flow rate (with hose and oval gear meter) |
Ø 25 mm up to 20 l/min* |
| Head | Ø 25 mm up to 5 m* |
| Viscosity | up to 200 mPas* |
| Density | up to 1,2* |
| * All physical data are real measured maximum values. * Test medium water 20 ° C, 2 m horizontal pressure pipe 1″, oval gear meter 1″, measured values: ± 5% Attention: When using a nozzle, the flow rate is reduced to app. 20-40 l/min (depends on the pump and application).. |
|
| Length | Order No. |
|---|---|
| Set with pump tube 500 mm | |
| 230 V |
1121 2505 |
| Set with pump tube 700 mm | |
| 230 V | 1121 2507 |
| Set with pump tube 700 | |
| 230 V with speed control |
1223 2507 |
Laboratory pump set with electric motor for light acids and alkalis
Laboratory pump set JP-120 PP (HC), Ø 28 mm,
Universal motor JP-120, 230 V, 50/60 Hz, 250 W, protection class IP 24, double insulated category II, over load protection switch with low voltage release, thermo protection, 5 m cable and plug.
Pump tube:
Polypropylene, outer-Ø 28 mm, Hastelloy-shaft
Connection thread G 1″
Hose connection ¾” (DN 19)
2 m PVC-Hose ¾” (DN 19)
2 Hose clamps Stainless steel
1 Nozzle Polypropylene ¾”
| Specifications JP-120 | |
|---|---|
| Flow rate (with hose and oval gear meter) |
Ø 28 mm up to 35 l/min* |
| Head | Ø 28 mm up to 7 m* |
| Viscosity | up to 200 mPas* |
| Density | up to 1,2* |
| * All physical data are real measured maximum values. * Test medium water 20 ° C, 2 m horizontal pressure pipe 1″, oval gear meter 1″, measured values: ± 5% Attention: When using a nozzle, the flow rate is reduced to app. 20-40 l/min (depends on the pump and application). |
|
| Length | Order No. |
|---|---|
| Set with pump tube 700 mm | |
| 230 V |
1121 2807 |
| Set with pump tube 1000 mm | |
| 230 V | 1121 2810 |
Laboratory pump set with electric motor for light acids and alkalis
Laboratory pump set JP-140 PP (HC), Ø 32 mm
Universal motor JP-140, 230 V, 50/60 Hz, 450 W, protection class IP 24, double insulated category II, over load protection switch with low voltage release, thermo protection, 5 m cable and plug.
Pump tube:
Polypropylene, outer-Ø 32 mm, Hastelloy-shaft
Connection thread G 1″
Hose connection ¾” (DN 19)
2 m PVC-Hose ¾” (DN 19)
2 Hose clamps Stainless steel
1 Nozzle Polypropylene ¾”
| Specifications JP-140 | |
|---|---|
| Flow rate (with hose and oval gear meter) |
Ø 32 mm up to 49 l/min* |
| Head | Ø 32 mm up to 10 m* |
| Viscosity | up to 400 mPas* |
| Density | up to 1,3* |
| * All physical data are real measured maximum values. * Test medium water 20 ° C, 2 m horizontal pressure pipe 1″, oval gear meter 1″, measured values: ± 5% Attention: When using a nozzle, the flow rate is reduced to app. 20-40 l/min (depends on the pump and application). |
|
| Length | Order No. |
|---|---|
| Set with pump tube 700 mm | |
| 230 V | 1141 3203 |
| Set with pump tube 1000 mm | |
| 230 V | 1141 3207 |
| Set with pump tube 1200 mm | |
| 230 V |
1141 3212 |
Laboratory pump set with electric motor for neutral and slightly aggressive media
Laboratory pump set JP-140 Stainless steel, Ø 32 mm
Universal motor JP-140, 230 V, 50/60 Hz, 450 W, protection class IP 24, double insulated category II, over load protection switch with low voltage release, thermo protection, 5 m cable and plug.
Pump tube:
Stainless steel, outer-Ø 32 mm, Stainless steel-shaft
Connection thread G 1″
Hose connection ¾” (DN 19)
2 m PVC-Hose ¾” (DN 19)
2 Hose clamps Stainless steel
1 Nozzle Polypropylene ¾”
| Specifications JP-140 | |
|---|---|
| Flow rate (with hose and oval gear meter) |
Ø 32 mm up to 49 l/min* |
| Head | Ø 32 mm up to 10 m* |
| Viscosity | up to 400 mPas* |
| Density | up to 1,3* |
| * All physical data are real measured maximum values. * Test medium water 20 ° C, 2 m horizontal pressure pipe 1″, oval gear meter 1″, measured values: ± 5% Attention: When using a nozzle, the flow rate is reduced to app. 20-40 l/min (depends on the pump and application). |
|
| Length | Order No. |
|---|---|
| Set with pump tube 700 mm | |
| 230 V | 1141 3205 |
| Set with pump tube 1000 mm | |
| 230 V | 1141 3209 |
| Set with pump tube 1200 mm | |
| 230 V |
1141 3214 |
Laboratory pump set with electric motor for concentrated media
Laboratory pump set JP-140 PVDF (HC), Ø 32 mm
Universal motor JP-140, 230 V, 50/60 Hz, 450 W, protection class IP 24, double insulated category II, over load protection switch with low voltage release, thermo protection, 5 m cable and plug.
Pump tube:
PVDF, outer-Ø 32 mm, Hastelloy-shaft
Connection thread G 1″
Hose connection ¾” (DN 19)
2 m Multi purpose chemical hose ¾” (DN 19)
2 Hose clamps Stainless steel
1 Nozzle PVDF ¾”
| Specifications JP-140 | |
|---|---|
| Flow rate (with hose and oval gear meter) |
Ø 32 mm up to 49 l/min* |
| Head | Ø 32 mm up to 10 m* |
| Viscosity | up to 400 mPas* |
| Density | up to 1,3* |
| * All physical data are real measured maximum values. * Test medium water 20 ° C, 2 m horizontal pressure pipe 1″, oval gear meter 1″, measured values: ± 5% Attention: When using a nozzle, the flow rate is reduced to app. 20-40 l/min (depends on the pump and application). |
|
| Length | Order No. |
|---|---|
| Set with pump tube 700 mm | |
| 230 V |
1141 3204 |
| Set with pump tube 1000 mm | |
| 230 V | 1141 3208 |
| Set with pump tube 1200 mm | |
| 230 V | 1141 3213 |
Laboratory pump set with electric motor for chemical products
Laboratory pump set JP-140 SS, Ø 32 mm
Universal motor JP-140, 230 V, 50/60 Hz, 450 W, protection class IP 24, double insulated category II, over load protection switch with low voltage release, thermo protection, 5 m cable and plug.
Pump tube:
Stainless steel 316Ti, outer-Ø 32 mm
Connection thread G 1¼”
Hose connection ¾” (DN 19)
2 m Universal chemical hose ¾” (DN 19)
2 Hose clamps Stainless steel
1 Nozzle Brass nickel plated ¾”
| Specifications JP-140 | |
|---|---|
| Flow rate (with hose and oval gear meter) |
Ø 32 mm up to 49 l/min* |
| Head | Ø 32 mm up to 10 m* |
| Viscosity | up to 400 mPas* |
| Density | up to 1,3* |
| * All physical data are real measured maximum values. * Test medium water 20 ° C, 2 m horizontal pressure pipe 1″, oval gear meter 1″, measured values: ± 5% Attention: When using a nozzle, the flow rate is reduced to app. 20-40 l/min (depends on the pump and application). |
|
| Length | Order No. |
|---|---|
| Set with pump tube 1000 mm | |
| 230 V |
1141 3210 |
Laboratory pump set (without Atex) with air operated motor for chemical products
Air operated motor JP-AIR 1, 300 W at max. 6 bar operating pressure. Motor with brass ball valve and muffler for compressed air control. This regulates the motor speed and varies the pumping capacity.
Pump tube:
Stainless steel 316Ti, outer-Ø 32 mm
Connection thread G 1″
Hose connection ¾″ (DN 19)
ATEX certificate for laboratory pump is in preparation.
2 m Universal chemical hose ¾″ (DN 19)
2 Hose clamps Stainless steel
1 Nozzle Brass nickel plated ¾″
| Specifications JP-AIR 1 |
|
|---|---|
| Flow rate (with hose and oval gear meter) |
Ø 32 mm up to 42 l/min* |
| Head | Ø 32 mm up to 8 m* |
| Viscosity | up to 400 mPas* |
| Density | up to 1,3* |
| * All physical data are real measured maximum values. * Test medium water 20 ° C, 2 m horizontal pressure pipe 1″, oval gear meter 1″, measured values: ± 5% Attention: When using a nozzle, the flow rate is reduced to app. 20-40 l/min (depends on the pump and application). |
|
| Length | Order No. |
|---|---|
| Set with pump tube 1000 mm | |
| 230 V |
3012 3210 |
| Set with pump tube 1200 mm | |
| 230 V | 3012 3212 |
