-
Vertical centrifugal pump principle
- Vertical centrifugal pump JP-830
VERTICAL CENTRIFUGAL PUMPS JP-830
Vertical centrifugal pumps with different immersion lengths are suitable for high capacities and longer service life.
Pump tube made of polypropylene or PVDF suitable for various media.
Length from 250 mm to 1400 mm.
Other materials and performance on request.
Vertical centrifugal pump JP-830.80
Technical data:
Specific gravity table:
Motor specification:
Material - Composition:
Technical data:
Inlet connections | 1 1/2″ F |
Outlet connections | 1″ M |
Max. Flow rate | 6 m³/h |
Max. Delivery head | 8 m |
Max. Viscosity | 100 mPas |
Max. Temperature |
PP -5 °C +65 °C |
Max. Temperature |
PVDF -20 °C +90 °C |
Impeller | Semi-opened |
Dimensions mm |
340 x 260 + Drive + Pump tube |
Specific gravity table:
L= 0,37 kW | M= 0,55 kW | H= 0,75 kW |
up to 1,2 | up to 1,5 | up to 1,9 |
Motor specification:
Size | kW | Design |
IEC 71 | 0,37 | B5 |
IEC 71 | 0,55 | B5 |
IEC 71 | 0,75 | B5 |
Material - Composition:
Casing | O-ring | Length mm | Connections |
Pump Design |
Motor Version |
P=PP K=PVDF |
D=EPDM V=VITON |
250 500 800 1000 |
1=BSP STD 2=FLANGED |
L = LOW DENSITY M = MEDIUM DENSITY H = HIGH DENSITY |
IE=IEC FLANGE |
The curves and perfomance values refer to pumps with free delivery outlet with water at 20 °C, and two poles motor 50 Hz. These data may vary according to the construction materials and hydraulic conditions.
Vertical centrifugal pump JP-830.90
Technical data:
Specific gravity table:
Motor specification:
Material - Composition:
Technical data:
Inlet connections | 1 1/2″ F |
Outlet connections | 1″ M |
Max. Flow rate | 10 m³/h |
Max. Delivery head | 10 m |
Max. Viscosity | 150 mPas |
Max. Temperatur | PP -5 °C +65 °C |
Max. Temperatur | PVDF -20 °C +90 °C |
Impeller | Semi-opened |
Dimensions mm |
340 x 260 + Drive + Pump tube |
Specific gravity table:
L= 0,55 kW | M= 0,75 kW | H= 1,1 kW |
Up to 1,2 | Up to 1,5 | Up to 1,9 |
Motor specification:
Size | kW | Design |
IEC 71 | 0,55 | B5 |
IEC 71 | 0,75 | B5 |
IEC 80 | 1,1 | B5 |
Material - Composition:
Casing | O-ring | Length mm | Connections |
Pump Design |
Motor Version |
P=PP K=PVDF |
D=EPDM V=VITON |
250 500 800 1000 |
1=BSP STD 2=FLANGED |
L=LOW DENSITY M=MEDIUM DENSITY H=HIGH DENSITY |
IE=IEC FLANGE |
Vertical centrifugal pump JP-830.95
Technical data:
Specific gravity table:
Motor specification:
Material - Composition:
Technical data:
Inlet connections | 1 1/2″ F |
Outlet connections | 1″ M |
Max. Flow rate | 14 m³/h |
Max. Delivery head | 12 m |
Max. Viscosity | 200 mPas |
Max. Temperatur | PP -5 °C +65 °C |
Max. Temperatur | PVDF -20 °C +90 °C |
Impeller | Semi-opened |
Dimensions mm |
340 x 260 + Drive + Pump tube |
Specific gravity table:
L= 0,75 kW | M= 1,1 kW | H= 1,5 kW |
Up to 1,2 | Up to 1,5 | Up to 1,9 |
Motor specification:
Size | kW | Design |
IEC 80 | 0,75 | B5 |
IEC 80 | 1,1 | B5 |
IEC 80 | 1,5 | B5 |
Material - Composition:
Casing | O-ring | Length mm | Connections |
Pump Design |
Motor Version |
P=PP K=PVDF |
D=EPDM V=VITON |
250 500 800 1000 |
1=BSP STD 2=FLANGED |
L=LOW DENSITY M=MEDIUM DENSITY H=HIGH DENSITY |
IE=IEC FLANGE |
Vertical centrifugal pump JP-830.110
Technical data:
Specific gravity table:
Motor specification:
Material - Composition:
Technical data:
Inlet connections | 2″ F |
Outlet connections | 1 1/2″ M |
Max. Flow rate | 20 m³/h |
Max. Delivery head | 15 m |
Max. Viscosity | 300 mPas |
Max. Temperatur | PP -5 °C +65 °C |
Max. Temperatur | PVDF -20 °C +90 °C |
Impeller | Semi-opened |
Dimensions mm |
340 x 260 + Drive + Pump tube |
Specific gravity table:
L= 1,1 kW | M= 1,5 kW | H= 2,2 kW |
Up to 1,2 | Up to 1,5 | Up to 1,9 |
Motor specification:
Size | kW | Design |
IEC 80 | 1,1 | B5 |
IEC 90 | 1,5 | B5 |
IEC 90 | 2,2 | B5 |
Material - Composition:
Casing | O-ring | Length mm | Connections |
Pump Design |
Motor version |
P=PP K=PVDF |
D=EPDM V=VITON |
500 800 1000 1250 |
1=BSP STD 2=FLANGED |
L=LOW DENSITY M=MEDIUM DENSITY H=HIGH DENSITY |
IE=IEC FLANGE |
Vertical centrifugal pump JP-830.120
Technical data:
Specific gravity table:
Motor specification:
Material - Composition:
Technical data:
Inlet connections | 2″ F |
Outlet connections | 1 1/2″ M |
Max. Flow rate | 25 m³/h |
Max. Delivery head | 16 m |
Max. Viscosity | 400 mPas |
Max. Temperatur | PP -5 °C +65 °C |
Max. Temperatur | PVDF -20 °C +90 °C |
Impeller | Semi-opened |
Dimensions mm |
360 x 300 + Drive + Pump tube |
Specific gravity table:
L= 1,5 kW | M= 2,2 kW | H= 3 kW |
Up to 1,2 | Up to 1,5 | Up to 1,9 |
Motor specification:
Size | kW | Design |
IEC 90 | 1,5 | B5 |
IEC 90 | 2,2 | B5 |
IEC 100 | 3 | B5 |
Material - Composition:
Casing | O-ring | Length mm | Connections |
Pump Design |
Motor version |
P=PP K=PVDF |
D=EPDM V=VITON |
500 800 1000 1250 |
1=BSP STD 2=FLANGED |
L=LOW DENSITY M=MEDIUM DENSITY H=HIGH DENSITY |
IE=IEC FLANGE |
Vertical centrifugal pump JP-830.130
Technical data:
Specific gravity table:
Motor specification:
Material - Composition:
Technical data:
Inlet connections | 2″ F |
Outlet connections | 1 1/2″ M |
Max. Flow rate | 30 m³/h |
Max. Delivery head | 20 m |
Max. Viscosity | 500 mPas |
Max. Temperatur | PP -5 °C +65 °C |
Max. Temperatur | PVDF -20 °C +90 °C |
Impeller | Semi-opened |
Dimensions mm |
360 x 300 + Drive + Pump tube |
Specific gravity table:
L= 2,2 kW | M= 3 kW | H= 4 kW |
Up to 1,2 | Up to 1,5 | Up to 1,9 |
Motor specification:
Size | kW | Design |
IEC 90 | 2,2 | B5 |
IEC 100 | 3 | B5 |
IEC 112 | 4 | B5 |
Material - Composition:
Casing | O-ring | Length mm | Connections |
Pump Design |
Motor version |
P=PP K=PVDF |
D=EPDM V=VITON |
500 800 1000 1250 |
1=BSP STD 2=LANGED |
L=LOW DENSITY M=MEDIUM DENSITY H=HIGH DENSITY |
IE=IEC FLANGE |
Vertical centrifugal pump JP-830.140
Technical data:
Specific gravity table:
Motor specification:
Material - Composition:
Technical data:
Inlet connections | 2″ F |
Outlet connections | 1 1/2″ M |
Max. Flow rate | 38 m³/h |
Max. Delivery head | 25 m |
Max. Viscosity | 500 mPas |
Max. Temperatur | PP -5 °C +65 °C |
Max. Temperatur | PVDF -20 °C +90 °C |
Impeller | Semi-opened |
Dimensions mm |
360 x 300 + Drive + Pump tube |
Specific gravity table:
L= 3 kW | M= 4 kW | H= 5,5 kW |
Up to 1,2 | Up to 1,5 | Up to 1,9 |
Motor specification:
Size | kW | Design |
IEC 100 | 3 | B5 |
IEC 112 | 4 | B5 |
IEC 112 | 5,5 | B5 |
Material - Composition:
Casing | O-ring | Length mm | Connections |
Pump Design |
Motor version |
P=PP K=PVDF |
D=EPDM V=VITON |
500 800 1000 1250 |
1=BSP STD 2=FLANGED |
L=LOW DENSITY M=MEDIUM DENSITY H=HIGH DENSITY |
IE=IEC FLANGE |