Drum pump with On/Off switch JP 360 JP 380

Electric universal motor JP-360

230 V, 50/60 Hz, 400 W, protection class II 2G Ex db IIC T6 Gb, IP 55, overload protection with integrated low voltage release, 5 m cable without plug.

Optional with Ex-plug. Also available in 115 Volt, 60 Hz.
Electric speed control JP-360

Electric speed control

The speed of the drum pump motor JP-360 can be controlled electronically via a knob on the handle. This enables an adjustment of the flow rate.
The electronic speed control is available as an option.

230 Volt, 50/60 Hz, 640 Watt, IP 55

The drive JP-360 is a compactly built, not explosion-proof, externally ventilated universal motor.

This handy, very robust and powerful motor can be used to drive the suction tubes of drum pumps. In this combination it is suitable for many thin liquid and slightly viscous, neutral, aggressive and non-flammable liquids (max. 600 mPas). Its sophisticated, technically clear structure ensures an efficient and safe use when transferring a wide range of media.

The drum pump motor is characterized not only by its light weight (5,5 kg) but also by its elegant design and ease of use. The non-stationary and stationary usable drive is particularly suitable for intermittent operation. As externally ventilated motor it has an optimal air cooling, low noise and ensures high operational safety and long lifetime.

The coated motor housing made of aluminium ensures a high chemical resistance when aggressive vapours of acids and alkalies are present.

The standard integrated low voltage release is intended to prevent an uncontrolled start of the drum pump motor after a power failure or voltage drop and thus guarantees maximum safety.

The flow rate of the media to be pumped can be regulated by an optionally available speed control that is integrated in the motor handle. Therefore the flow rate can be adjusted to the needs of the user.

The maximum density of the media is for the JP-360 universal motor 1.5, the maximum viscosity 600 mPa.