CROSS-BEAM AGITATOR
Application
Agitators are used for intensive mixing and dissolving processes for liquids of low to medium viscosity. Media can be mixed right in the IBCs, avoiding the need for time-consuming pumping procedures. They are distinguished by their compact construction, high efficiency and their robustness during daily use.
Ease of use, low running costs, maximum reliability.
Examples of the areas in which they are used include:
The food and drinks industry
The cosmetics and perfume industry
The chemicals and mineral oil industry
The paint and dye industry
Water treatment
DRIVE
The drive is a high efficiency IEC squirrel Cage motor. It has a voltage of 400V, 50Hz, an IP rating of IP55 and insulation class F. Customised versions are possible. The motor bearings have life-time lubrication and are therefore maintenance-free.
LIFTING BEAM
The V2A cross-beam has two carrying handles and quick-release hooks. This allows the agitator to be changed quickly and easily. The cross-beam also has a motor protection switch with a 16A CEE.
MIXER SHAFT
A sleeve coupling connects the mixer shaft to the rotor by means of an interlocking fit. Delivered in V4A as standard. Other versions are:
Sheathed with St/PP or PVDF.
Coated with ECTFE.
Drive shaft lengths up to approx. 1000 mm are possible..
MIXING IMPELLERS
For the impellers, PJ type propellers are provided as standard. Other types are available, depending on the stirring task involved. The versions are: V4A, PP, PVDF, coated in hard rubber or ECTFE.
OPTIONS
ATEX 2014/34/EC
Pole-changing
PTC sensor
Variable frequency drive on the junction box
| Drive | Three-phase motor |
| Power | 1,1 kW |
| Operating voltage | 230/400 V, 50 Hz |
| Speed | 1410 rpm |
| Protection class | IP 55 |
| Insulation class | IE3 |
| Construction form | V1 |
| On-off motor protection switch | with low voltage release on the traverse, connection 16A CEE plug collar |
| Traverse | 1029 x 250 mm for grid frame containers, equipped with two handles and a quick clamp device |
| Mixer shaft | ∅ 20 x 900 mm free exiting |
| Mixing blades | PJ 150 the shaft end |
| Material | Traverse in V2A, shaft and wing in V4A, shaft sanded, wing blasted |
| Weight | 26 kg |
| Surface | RAL 3000 |
