Company | References | Product news        

CROSS-BEAM agitator


Agitators are used for intensive mixing and dissolving processes for liquids of low to medium viscosity. Media can be mixed right in the IBCs, avoiding the need for time-consuming pumping procedures. They are distinguished by their compact construction, high efficiency and their robustness during daily use.

Ease of use, low running costs, maximum reliability.
Examples of the areas in which they are used include:

  • The food and drinks industry
  • The cosmetics and perfume industry
  • The chemicals and mineral oil industry
  • The paint and dye industry
  • Water treatment



The drive is a high efficiency IEC squirrel Cage motor. It has a voltage of 400V, 50Hz, an IP rating of IP55 and insulation class F. Customised versions are possible. The motor bearings have life-time lubrication and are therefore maintenance-free.


The V2A cross-beam has two carrying handles and quick-release hooks. This allows the agitator to be changed quickly and easily. The cross-beam also has a motor protection switch with a 16A CEE.


A sleeve coupling connects the mixer shaft to the rotor by means of an interlocking fit. Delivered in V4A as standard. Other versions are:

  • Sheathed with St/PP or PVDF
  • Coated with ECTFE

Shaft lengths of up to approx. 1000 mm are possible.


For the impellers, PJ type propellers are provided as standard. Other types are available, depending on the stirring task involved. The versions are: V4A, PP, PVDF, coated in hard rubber or ECTFE

  • ATEX 2014/34/EU
  • pole-changing
  • PTC sensor
  • Variable frequency drive on the junction box
previous arrow
next arrow

Operating data

Drive Three-phase motor
Power 1,1 kW
Operating voltage 230/400 V, 50 Hz
Speed 1410 rpm
Protection class IP 55
Insulation class IE3
Construction form V1
On-off motor protection switch with low voltage release on the traverse, connection 16A CEE plug collar
Traverse 1029 x 250 mm for grid frame containers, equipped with two handles and a quick clamp device
Mixer shaft ∅ 20 x 900 mm free exiting
Mixing blades PJ 150 the shaft end
Material Traverse in V2A, shaft and wing in V4A, shaft sanded, wing blasted
Weight 26 kg
Surface RAL 3000