Pump tubes for
eccentric screw pumps
JP-700 DR

Pump tubes JP-700 DR with rigid and flexible coupling

PumP tube

All parts of the pump that will get in contact with pumped medium are made of stainless steel or identical to material of stator.

Shaft seal by stuffing box packing or single acting mechanical seal stainless steel/carbon/FKM. At discharge side male thread R 1½“ made of stainless steel.

Suction tube Ø 54 mm, at discharge male thread connection G 1½“.

Optional hose connection 1″, 1¼“ or 1½“.

The stators are adapted to the medium and available in NBR, NBR light, FKM, EPDM, EPDM light, PTFE.

 

Pump tube

			JP-700. 12.1 DR	JP-700. 25.1 DR
Stator material	Pump tube length	Pressure	Flow	Flow
NBR NBR light	700 mm	6 bar	12 l/min	25 l/min
	1000 mm
	1200 mm
EPDM EPDM light	700 mm	6 bar	12 l/min	25 l/min
	1000 mm
	1200 mm
FKM	700 mm	6 bar	12 l/min	25 l/min
	1000 mm
	1200 mm
PTFE	700 mm	2 bar	12 l/min	25 l/min
	1000 mm
	1200 mm

Pump tube

			JP-700. 12.2 DR	JP-700. 25.2 DR
Stator material	Pump tube length	Pressure	Flow	Flow
NBR NBR light	800 mm	12 bar	12 l/min	25 l/min
	1100 mm
	1300 mm
EPDM EPDM light	800 mm	12 bar	12 l/min	25 l/min
	1100 mm
	1300 mm
FKM	800 mm	12 bar	12 l/min	25 l/min
	1100 mm
	1300 mm
PTFE	800 mm	3 bar	12 l/min	25 l/min
	1100 mm
	1300 mm

Pump tube

			JP-700. 50.1 DR
Stator material	Pump tube length	Pressure	Flow
NBR NBR light	800 mm	6 bar	50 l/min
	1100 mm
	1300 mm
EPDM EPDM light	800 mm	6 bar	50 l/min
	1100 mm
	1300 mm
FKM	800 mm	6 bar	50 l/min
	1100 mm
	1300 mm
PTFE	800 mm	2 bar	50 l/min
	1100 mm
	1300 mm

Pump tube

			JP-700. 50.2 DR
Stator material	Pump tube length	Pressure	Flow
NBR NBR light	900 mm	12 bar	50 l/min
	1200 mm
	1400 mm
EPDM EPDM light	900 mm	12 bar	50 l/min
	1200 mm
	1400 mm
FKM	900 mm	12 bar	50 l/min
	1200 mm
	1400 mm
PTFE	900 mm	3 bar	50 l/min
	1200 mm
	1400 mm