Dosing pumps for thin fluid to high viscous media
JP-7032 -7120.2
Type JP-7032 up to JP-7120.2. Almost pulsation free transport and small quantity dosing of thin to high viscous, thixotropic, gaseous, solids and fibres containing, aggressive and neutral media in nearly all industries.
Features
High dosing precision
Flow rate adjustable by the speed of the motor
Stainless steel execution SS 316Ti
Pump and motor directly coupled
Space-saving design
Flow rates from 0,6 up to 1200 l/h
Pressure stages 6, 12, 18 and 24 bar
Thread connections on suction side G 1” and G ½” on discharge side G 1”
Totally enclosed pin joints
Rotor SS 316Ti
Stator material adapted to the pumped medium (NBR, NBR light, FKM and EPDM, EPDM light; PTFE is only available at types JP-7115.1 and JP-7115.2)
Media
CHEMICAL PRODUCTS
Colours • resins • coatings • latex • polymers • silicones
MINERAL OIL PRODUCTS
Oils • Fats • Cutting oils • Coolant • etc.
FOOD
Tomato puree • ketchup • jam • honey • fruit juices and concentrates • wine grapes • mashes • fruit pulps • milk products • chocolate mass • dough • pectin
COSMETIC AND PHARMACEUTICAL INDUSTRY
Cleaning agent • liquid soaps • glycerine
Shaft seal by single-acting mechanical seal or stuffing box
The JESSBERGER high viscosity dosing pumps are supplied as standard with either a for operation with frequency inverter drive suitable gear motor or with an adjustable manually control gear motor. The pumps currently do not yet have ATEX approval and should therefore not be used for pumping flammable media.
MOTORS
JP-7032 -7120.2
Type series JP-7032 to 7120.2 is supplied with two different drives
Gear motor, suitable for use with frequency inverter
Between 12 and 100 Hz, 230/400 V, 50 Hz, IP 55, B3/B5, flange 120 mm, Iso class F, thermo sensors 3 x 155°C
Power 0,37 kW up to 1,1 kW
Frequency inverter for installation in switchboard, with operating terminal, single phase AC connection 1 x 230 V, 50/60 Hz
Frequency inverter on gear motor, speed control by potentiometer or operating terminal, 3 x 230/400 V, 50/60 Hz
Gear motor, adjustable via hand
0,37 kW and 1,1 kW stepless variable from 0 to 1200 rpm
| Technical data | |||||
| Types | Flow l/h |
Pressure bar |
Power kw |
Speed min-1 |
Drive |
| JP-7032 | 0,6 -3 |
12 | 0,37-0,75 | 0-700 | SK 01 |
| JP-7052 | 1,2 -12 |
||||
| JP-7082 | 6 -54 |
||||
| JP-7112 | 15-150 | ||||
| JP-7115.1 | 50-600 | 6 | 0,37-1,1 | ||
| JP-7115.2 | 50-600 | 12 | |||
| JP-7115.3 | 50-600 | 18 | |||
| JP-7115.4 | 50-600 | 24 | |||
| JP-7120.1 | 50-1200 | 6 | |||
| JP-7120.2 | 50-1200 | 12 | |||