Company | References | Product news        

Electric universal motor

230 Volt, 50 Hz, 640 Watt, IP 24,
alternatively 115 Volt, 60 Hz

The drive JP-180 is a compactly built, not explosion-proof, internally ventilated universal motor that is our top seller for aggressive media in the chemical and the galvanic industry
beside JP-280.

This handy, very robust and powerful motor can be used to drive the suction tubes of drum pumps. In this combination it is suitable for many thin liquid and slightly viscous, neutral, aggressive and non-flammable liquids (max. 600 mPas). Its sophisticated, technically clear structure ensures an efficient and safe use when transferring a wide range of media.

The drum pump motor is characterized not only by its light weight (3,6 kg) but also by its elegant design and ease of use. The non-stationary and stationary usable drive is particularly suitable for intermittent operation. As internally ventilated motor it has an optimal air cooling, low noise and ensures high operational safety and long lifetime.

The motor housing made of polypropylene ensures a high chemical resistance when aggressive vapours of acids and alkalies are present.

The standard in the on/off switch integrated low voltage release is intended to prevent an uncontrolled start of the drum pump motor after a power failure or voltage drop and thus guarantees maximum safety.

The flow rate of the media to be pumped can be regulated by an optionally available speed control that is integrated in the motor handle. Therefore the flow rate can be adjusted to the needs of the user.

The maximum density of the media is for the JP-180 universal motor 1.5, the maximum viscosity 600 mPas.


Electronic speed control


The speed of the drum pump motor JP-180 can be controlled electronically via a knob on the handle. This enables an adjustment of the flow rate.
The electronic speed control is available as
an option.

Motor without pump tube
Version Voltage Order-No.
without LVR 230 V 1~, 50 Hz, 640 W 1180 2300
115 V 1~, 60 Hz, 640 W 1180 1150
with NSP 230 V 1~, 50 Hz, 640 W 1180 2301
115 V 1~, 60 Hz, 640 W 1180 1151
without LVR, with SC 230 V 1~, 50 Hz, 640 W 1180 2302
115 V 1~, 60 Hz, 640 W 1180 1152
with LVR + SC 230 V 1~, 50 Hz, 640 W 1180 2303
115 V 1~, 60 Hz, 640 W 1180 1153
LVR: Low voltage release
SC: Speed control
Operating  data JP-180
Flow rate (with hose
and oval gear meter)
Ø 41 mm up to 93 l/min* (Rotor)
Ø 41 mm up to 74 l/min* (Impeller)
Head Ø 41 mm up to 11 m* (Rotor)
Ø 41 mm up to 26 m* (Impeller)
Viscosity up to 600 mPas*
Density up to 1,5*
* All physical data are real measured maximum values.
* Test medium water 20 °C, 2 m pressure pipe 1″, oval gear meter 1″, measured values: ± 5%


Electric universal motor JP-180

230 Volt, 50 Hz, 640 Watt, IP 24, double insulation protection class II, over load protection switch with integrated low voltage release. 5 m cable with plug.

Also available in 115 volts, 60 Hz.
Speed control as option.