Hand operated drum pumps

For a safe and convenient emptying of drums and container we also offer a complete series of manual hand pumps. Hand pumps are pumps that are manually operated by hand. Depending on the medium different materials of the pump and of the seals are available. In principle the hand pumps by JESSBERGER can be divided into three groups: for mineral oil products, for chemicals / cleaning solutions and flammable media like gasoline or solvents.

The illustrated hand pumps can be used for 200 liter drums and smaller containers. But if you ever need to remove small quantities of media out of of an IBC we can extend the suction tube at several plastic hand pumps up to 1200 mm pump tube length. Or hand pumps are equipped with a 2" male thread drum adapter (at some pumps it can be ordered as an accessories) and can be mounted in every 60 and 200 liters of standard steel drums. For plastic canisters and plastic drums there are nine different thread adapters upon request available. We will be glad to help you to make the right choice!

Our manual drum pumps in a short overview:

 

Hand pump JP-02 for acids, alkalies and water-based chemicals
Pump material: Polypropylene
Shaft: Stainless steel 316 Ti
Seals: Viton
Flow rate: 0.3, 0.37 or 0.45 l / stroke depending on lever position
The telescopic suction tube is adjustable from 340-900 mm with
Ø 40 mm. The pump housing has two male threads G 2 and G 1 ½ ".

 

 


JP-03 hand pump for diesel, oil, antifreeze, alcohol (max. 50%), water, etc.
Pump Material: Polypropylene
Shaft: tool steel
Seals: NBR/ Buna
Power: 0.3, 0.37 or 0.45 l / stroke depending on lever position
The telescopic suction tubes is adjustable from 340-900 mm
Ø 40 mm. The pump housing has two male threads G 2 and G 1 ½ ".

 

 


Hand pump JP-04 (blue) for diesel, oil, anitifreeze, etc.
Pump Material: Polypropylene
Shaft: Polypropylene
Seals: NBR/ Buna
Output: 0.3 l / stroke
Hose connection: ¾ "
The telescopic suction tube is adjustable from 480-950 mm
and has a diameter of max. 34 mm. The pump housing has
a male thread in 2" and can be fixed in standard steel drums.

 

 


Hand pump JP-04 (yellow) for aggressive chemicals
Pump Material: Polypropylene
Shaft: Polypropylene
Seals: Viton
Output: 0.3 l / stroke
Hose connection: ¾ "
The telescopic suction tube is adjustable from 480-950 mm
and has a diameter of max. 34 mm. The pump housing has
a male thread in 2" and can be fixed in standard steel drums.

 

 


Stainless steel hand pump JP-05 for flammable media
Tested by risk analysis of the risk TÜVs Munich!
Pump tube made of Stainless Steel 316 Ti, seals made of PTFE
Suitable for flammable liquids like solvents (including acetone!)
Ppump tube lengths: 700 or 1000 mm
Flow rate: 0.3 to 0.6 l / stroke
Necessary accessories for the hand pump JP-05:
Discharge arc with PTFE seal and wing nut
Hose connection in Stainless Steel ¾ "or 1" with PTFE seal and wing nut made of brass nickel plated
Drum adapter made of brass, nickel plated R 2", with fixing device
Anti-static set of 4 copper cables (absolutely necessary when pumping flammable media)

 

 


Plastic hand pump JP-06 for water, lightly aggressive acids and bases
Pump material: Polyethylene and PVC
Pump tube length: 850 mm
Flow rate: 0.08 l / pumping or 18 l / min when working as a siphon pump
Hand pump complete with 130 cm long discharge hose, barrel adapter with male thread G 2 ".
This hand pump is designed as siphon pump. After the suction tube and the discharge hose have been filled the pumping process continues independently.

 



 Hand pump JP-07, available with different seals
By the pumping motion can be generated in a pressure barrel or canister.
After this pressure was built up, the medium flows out automatically after
opening the filling valve, so that a certain amount to be filled on the tap.
Pump body made ​​of polypropylene, seals according to the medium
Three adapters for openings of diameter of 46.5 mm to 60 mm and a
four-piece intake manifold are provided.
Output: Water: 20 l /, oil SAE 30: 9 l / min at 20 ° C
Temperature: 40 ° C, viscosity: 400 mPas
JP-07 with blue nitrile seals for transfer of oily
Substances and petroleum-based products, boric acid, bleach,
Diesel / heating oil, and media of foods such as olive oil, malt
drinks, cod liver oil and ketchup
JP-07 red with EPDM seals for the promotion of basic and
alcoholic fluids (50%) and acetic acid, fluorine silica,
Formic acid (not concentrated, since then flammable), hexane, sulfur
acid (max. 50%), caustic soda and phosphoric acid
JP-07 green with Viton seals for acids and chemicals such as
Methylene chloride, nitric acid (max. 10%), hydrochloric acid,
sulfuric acid (max. 60%), hydrogen peroxide (up to 50%), etc.
Optional accessories for the hand pump JP-07:
Transfer tubing (1.5 m) including the tap

 

 

Hand-crank rotary pump JP-08 for very aggressive media
Pump material: PTFE, regular lubrication required
Seals: PTFE
Stem length: 3 x 35 cm
Flow rate: 0.3 l / revolution
Complete with pump discharge tube and barrel adapter G 2 "

 


Hand-crank rotary pump JP-11 for low-viscosity,
non-combustible fluids such as diesel, oils,
Mineral oils, because of corrosion but not for water
Material: aluminum and galvanized steel
NBR seals
Flow rate: 1 l / revolution, changing from forward to
Backward pumping at any time. This results in a
optimal dosing.
Head: 15 m
Horizontal distance: 50 m
Pump with outlet hose and barrel adapter G 2 "

 

 


Hand-crank rotary pump JP-12 for low-viscosity,

non-combustible fluids such as diesel, oils,
Mineral oils, because of corrosion but not for water
Material: aluminum and galvanized steel

NBR seals
Flow rate: 1 l / revolution, changing from forward
to reverse conveying any time. This results in
optimal dosing.
Head: 15 m
Horizontal distance: 50 m
Pump complete with a special oil tube
Outlet elbow and barrel adapter G 2 ""

 

 


Metal hand crank pump JP-13 for diesel, heating oil,

Oils (up to SAE 90) and all other self-lubricating,
non-aggressive and non-flammable materials,
because of corrosion but not for water
Materials: Pump body in cast iron

NBR seals
Flow rate: 0.25 l / revolution
Immersion length 980 mm and therefore suitable for smaller
Container and 200 liter drums
Pump discharge tube and barrel adapter G 2 "


 

 


Lever pump JP-14 for liquid metal

non-combustible fluids such as diesel, antifreeze,
Machinery and mineral oils, but because of corrosion
not for water

Material: zinc alloy
NBR seals
Flow rate: 0.5 l / stroke
For drums and containers of 30-200 liters. The Teles
kopsaugrohr enables universal use.
Pump with G 2 "threaded barrel

 

 


Lever pump JP-15 for liquid metal is not,

combustible fluids such as diesel, antifreeze, engine
and mineral oils, because of corrosion but not for water
Material: Galvanized steel
NBR seals
Capacity: 0,35 l / stroke
For drums and containers suitable of 30-200 liters.
The telescope dip tube enables universal use.
G 1 ½ "and G 2" threaded barrel, pump discharge tube. The
Outlet has a ¾ "thread so that other connection options
opportunities exist.

 

 


ATEX compliant fire hand pump JP-16
Single-acting reciprocating pump, for the following
Media derGefahrenklassen AI is used-III:
Diesel, fuel oil EL / L, fuels, petroleum, cooler Frost

medium (undiluted), low viscosity mineral oils and RME
Fire design with flexible hose
Suction hose DN 19 x 4, 1.5 m
Discharge hose, DN 19 x 4, 1.5 m

The built-in recessed threaded M64 x 4 and G 2 "
allow for easy mounting in the barrel
Flow rate: about 0.25 l / stroke

 

 


Stainless steel hand pump JP-17 for combustible fluids
Pumping station, stainless steel 1.4301 and 1.4571
All seals made of PTFE, therefore suitable for flammable
Liquids such as solvents (except acetone)
Flow rate: 0.5 l / stroke
Length: 1000 mm
Essential accessories for the hand pump JP-17:

Nickel plated brass barrel adapter R 2 ", with lock
Anti-static Set of 4 copper cables (for filling
flammable liquids required)

 

 


Battery Pump - Battery pump
For water, diesel, light oils, neutral, slightly
aggressive and non-combustible fluids.
Use only for short-term operation.
Pumping plant material: PP, PE and ABS
Stem length: 60 cm
Discharge hose: 60 cm
Largest dip tube diameter: 31.7 mm
Flow rate: 8 l / min.
Drive through 3 batteries, Size D, 1.5 Volt
(Not included, sold separately)

Material: Aluminium and zincplated
steel tube. This versatile drum

pump is suitable for the transfer of
low viscosity fluids such as gasoline,
kerosene, diesel, machine oil,

etc.


Clockwise or counterclockwise or
for discharging or suctioning freely.

Vertical conveying distance 15
m, horizontal conveying distance
50 m. One liter / per rotation