The drum pumps, barrel pumps and container pumps by JESSBERGER are light, handy and powerful devices for an economic and safe filling and transferring of thin fluid up to middle viscous, neutral or aggressive media out of drums and containers. They can be used as transportable or stationary drum and container pumps and are designed for a intermittent, non-continuous use. A well engineered and technologically clear design our drum pumps guarantees you an efficient and operationally reliable usage.
Different pump tubes of our drum pumps for different media are interchangeable and can be used with same electric or pneumatic driven motor. Outside ex areas our pump tubes can be also combined with the motors of some of our competitors and vice versa. Please ask us for details and convince by yourself of our expert advice and the optimal cost performance ratio of our drum pumps.
The flow rate of a drum pump depends firstly on the speed of the motor and then on the engine output. Our top sellers are the universal motor JP-180 (230 Volt, IP 24, 600 Watt) and the JP-280 (230 Volt, IP 24, 600 Watt). Further more we can offer also motors in protection class IP 54 as well as an electric ex motor in 550 Watt and ATEX certified pneumatic driven motors.
An electronic speed control for the motor of drum pumps is available as an option. The rotation speed of the drum pump motors JP-160 JP-180 JP-200 JP 280 and JP-300 is hereby controlled by a knob at the handle so that the capacity of the drum pumps can be adjusted for the particular application. At the air motors the speed of the motors and capacity of the drum pump can easily be regulated by the air supply.
For flammable liquids and for use in hazardous areas ex-proof drum pumps are available with appropriate accessories. The electric and air driven motors and pump tubes made of conductive stainless steel (pump tube diameter 41 mm, mixing pump tubes, eccentric screw pump JP SR-700 with PTFE stator) are certified to ATEX 100a. Also conductive solvent hoses made of EPDM or multi-purpose chemical hoses made of crosslinked polyethylene are available from stock. While pumping flammable materials it is also important to ensure that an absolutely necessary potential equalization is made. For this purpose the available bonding ground set can be used.
To offer the right drum pump for your application we need the following information:
Complete Drum pump sets
Whether for acids, alkalies or highly concentrated
chemicals, mineral oil products or flammable media
likes gasoline and solvents.
JESSBERGER offers pre-assembled drum pump sets
consisting of drum pump, 2 m media resistant hose
and a nozzle that is suitable for your application.
The prices of these sets are even more attractive
than our already low list prices.
Drum pumps as laboratory pumps
The economic and safe solution for the filling and
refilling of small quantities of aggressive media
like acids, alkalies, cleaning solutions out of bal-
loons, cans or 60 / 200 liter drums is called
JESSBERGER laboratory pumps.
Pump tubes for aggressive, corrosive, neutral and
non flammable media
Our pump tubes made of Polypropylene and a
shaft in Stainless Steel or Hastelloy are the right
choice for a safe and economic transferring of these
media out of cans, 60 or 200 liter drums, 1000 liter
containers (IBCs) or bigger containers. These pumps
are mostly sold to chemical or galvanic field.
Pump tubes for highly aggressive chemicals
The drum pumps made of PVDF are designed
for highly corrosive acids and alkalies when
Polypropylene is not resistant any more or
if the temperature of the medium is between
50 and 90° Celsius.
Pump tubes for mineral oil products
The pump tubes made of Aluminium can be
used for pumping diesel, fuel oil, hydraulic
oils, machine oils, mineral oils and many other
non flammable media. The pumps are especially
used by our customers in the automotive industry.
With the JP-280 universal motor all media up
to 1.000 mPas can be handled.
Pump tubes for flammable media
For pumping flammable media or use in
hazardous areas only pump tubes made
of Stainless Steel are allowed to be used.
They fulfill the highest quality standards
of operational safety and all security as-
pects as well as the strict requirements
of ATEX 100a.
Mixing pump tubes
Mixing pump tubes are designed for those
applications in which thin fluid up to middle
viscous media have to be mixed before
these liquids will be pumped out of 200
liter drums or containers.
Pump tubes for a complete drum emptying
These drum pumps are designed for a nearly
complete drum emptying of neutral, lightly ag-
gressive, dangerous and economically valuable
media. These pump tubes are made of Stain-
less Steel and are mostly used by our customers
in the pharmaceutical and in the cosmetics in-
dustry for many different aplications.
