Company | References | Product news        

Manual hand pumps

For a safe and convenient emptying of drums and containers we also offer a complete series of manual hand pumps

Hand pumps are pumps that are manually operated by hand. Depending on the medium different materials of the pump and of the seals are available. In principle the hand pumps by JESSBERGER can be divided into three groups: for mineral oil products, for chemicals / cleaning solutions and flammable media like gasoline or solvents.

 

The illustrated hand pumps can be used for 200 liter drums and smaller containers. But if you ever need to remove small quantities of media out of of an IBC we can extend the suction tube at several plastic hand pumps up to 1200 mm pump tube length.

Our hand pumps are equipped with a 2″ male thread drum adapter (at some pumps it can be ordered as an accessories) and can be mounted in every 60 and 200 liters of standard steel drums. For plastic canisters and plastic drums there are nine different thread adapters upon request available. We will be glad to help you to make the right choice!

 
Hand pump JP-02

For acids, alkalies and water-based chemicals.

Pump material: Polypropylene
Shaft: Stainless steel 304
Seals: FKM
Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on lever position
Pump tube length: 340–900 mm
Pump tube diameter: max. 40 mm
Thread adapter: G 2″ and G 1½“

Order No.: 6002 0000

 

JP-02-gelb_large

 
Hand pump JP-03

For oils, diesel, alcohol up to max. 50%, antifreeze liquid, water, etc.

Pump material: Polypropylene
Shaft: Tool steel
Seals: NBR
Flow rate: 0,3, 0,37 or 0,45 l/stroke* depending on lever position
Pump tube length: 340–900 mm
Pump tube diameter: max. 40 mm
Thread adapter: G 2″ and G 1½“ mm
Gewindeadapter: G 2″ und G 1½“

Order No.: 6003 0000

 

JP-03_large

 
Hand pump JP-04

For different media.

Pump material: Polypropylene
Shaft: Polypropylene
Seals: depending on the media
Flow rate: ca. 0,3 l/stroke*
Hose connection: ¾“
Pump tube length: 500–900 mm
Pump tube diameter: max. 34 mm
Thread adapter: G 2″

JP-04 YELLOW with FKM seals for aggressive media such as acids and alkalis

Order No.: 6004 0000

JP-04 BLUE with NBR seals for mineral oil products

Order No.: 6004 0001

JP-04 RED with EPDM seals for alkaline media

Order No.: 6004 0002

JP-04 BLUE/ WHITE with fluoropolymer seals for liquid foods

Order No.: 6004 0003

 

JP-04_large_5_
 
Stainless steel hand pump JP-05

Suitable for flammable liquids.

Pump material: Stainless steel 316Ti
Seal: PTFE
Flow rate: 0,3–0,6 l/stroke*
Pump tube length: 700 and 1000 mm
Pump tube diameter: 32 mm

Suitable for flammable liquids such as solvents (including acetone)
Certified: risk analysis made by TUEV Munich

Necessary accessories:

Discharge arc with PTFE seal and wing nut

Hose connection made of stainless steel ¾ or 1″, with PTFE seal and wing nut made of brass, nickel plated

Drum adapter made of brass nickel plated R2″ with fixing device

Anti-static set consisting of 4 copper cables (absolutely
necessary when pumping flammable liquids)

Order No.:
700 mm 6005 0700
700 mm Ex 6005 700
1000 mm 6005 1000
1000 mm Ex 6005 1000

 

 
Plastic hand pump JP-06

Suitable for water, slightly aggressive acids and alkalies.

Pump material: Polyethylene and PVC
Flow rate: 0,08 l/pumping process and 20 l/min at an independent transferring*
Pump tube length: 850 mm
Pump tube diameter: 25 mm
Thread adapter: G 2″

Hand pump complete with 130 cm long discharge hose and drum adapter G 2″.

This hand pump is designed as a siphon pump. After the suction pipe and discharge hose arc had been filled manually the pump works independently.

Order No.: 6006 0000

 

handpumpe-jp-06_large
 
Hand pump JP-07

Available with different seals, pump body made of polypropylene, inner parts but also made of stainless steel.

Pump body: made of polypropylene, internal parts also made of stainless steel
Seal: acc. media
Flow rate: Water: 20 l/min*, Oil SAE 30: 9 l/min. at 20°C*
Pump tube length: Suction pump consisting of four parts, each 250 mm
Pump tube diameter: max. 31 mm
Rubber adapter: for bung hole diameters from 46,5 to 60 mm
Temperature: 40°C*
Viscosity: 400 mPas*

By pumping movement pressure can be generated in a barrel or canister. After this pressure has been build, the medium flows out independently after opening the filling tap, so that a certain quantity can be filled by the tap.

Three adapters for bunghole diameters of 46.5 to 60 mm are included.

JP-07 BLUE with NBR seals for the transfer of oily substances and petroleum-based products.

Order No.: 6007 0001

JP-07 RED with EPDM seals for the transfer of basic media. Attention: the internal parts of the hand pump are also made of stainless steel.

Order No.: 6007 00002

JP-07 GREEN with FKM seals for light acids and chemicals. Attention: the internal parts of the hand pump are also made of stainless steel.

Order No.: 6007 0003

Optional accessories for hand pumps JP-07:
Transverse hose (1.5 m) incl. tap

handpumpe-jp-07_st_5_
 
Hand-crank rotary pump JP-08

The pump is suitable for thin fluid, highly aggressive media such as acids and alkalies.

Pump material: PVDF
Seals: PTFE
Flow rate: 0,3 l/rotation*
Pump tube length: 3 x 35 cm

Pump complete with discharge arc and drum adapter G 2″.
Regular lubrication required.

Order No.: 6008 0000

 

JP-08_large
 
Hand pump JP-09

Suitable for almost all highly liquid and slightly aggressive media such as acids, alkalis and chemicals. Better resistance as JP-02 due PP-sheathed shaft.

Pump material: Polypropylene
Seals:
FKM
Flow rate:
0,5 l/stroke*
Telescopic suction tube: 3 parts, polyethylene
Suction depth:
for containers to 960 mm
PE hose: 2 m
Weight: 1.2 kg

Thread G 2″ for screwing in standard barrels.

Adapters available for plastics drums and cans of 60-220 l.
Outlet piece DN 19, 3/4″.

The pump is not to be used for pumping media of hazard classes AI / AII, other flammable media or in an explosive environment.

Order No.: 6009 0000

handpumpe-jp-09_large
 
Hand-crank rotary pump JP-11

The pump is suitable for thin fluid, non-flammable liquids such as diesel, gear oil, heating oil, hydraulic oil, machine oil, mineral oil, motor oil, etc. up to 1000 mPas.

Pump material: Aluminium and zinc plated steel
Seals: NBR
Flow rate: 1 l/rotation* Changing from forward to reverse transferring possible. Thus results an optimal dosing.
Pump tube length: 1,080 mm
Pump tube diameter: 53 mm (sieve)
Head: 15 m*
Horizontal distance: 50 m*

Pump complete with discharge hose and drum adapter G 2″.

Order No.: 6011 0000

handpumpe-jp-11_large
Hand-crank rotary pump JP-12

The pump is suitable for thin fluid, non-flammable liquids such as diesel, gear oil, heating oil, hydraulic oil, machine oil, mineral oil, motor oil, etc. up to 1000 mPas.

Pump material: Aluminium and zinc plated steel
Seals: NBR
Flow rate: 1 l/rotation*, changing from forward to reverse transferring possible. Thus results an optimal dosing.
Pump tube length: 1,080 mm
Pump tube diameter: 53 mm (sieve)
Head: 15 m*
Horizontal distance: 50 m*

Pump complete with special mineral oil hose 2000 mm, discharge arc and drum adapter G 2″.

Order No.: 6012 0000

 

handpumpe-jp-12_large
 
Metal hand crank rotary pump JP-13

The pump is suitable for diesel, heating oil, oils (up to SAE 90) and all other self-lubricating, non-aggressive and non-flammable media.

Pump material: pump housing made of cast iron
Seals: NBR
Flow rate: 0,25 l/rotation*
Pump tube length: 1000 mm, three parts therefore suitable for smaller containers and 200 liter drums.
Pump tube diameter: max. 40 mm

Pump complete with discharge arc and drum adapter G 2″.

Order No.: 6013 0000

 

 handpumpe-jp-13_larger_3
 
Hand lever pump JP-14

Pump is suitable for thin-liquid, non flammable media like diesel, machine oils, mineral oils, etc.

Pump material: Metal, zinc alloy
Seals: NBR
Flow rate: 0,5 l/stroke*
Pump tube length: 450–840 mm
Pump tube diameter: 40 mm
Thread adapter: G 2″

Telescopic suction tube enables an universal use for all sizes of drums.

Order No.: 6014 0000

 

JP-14_large
 
Hand lever pump JP-15

For transferring many thin fluid, non-flammable media such as diesel, oils, anti freezing liquid, etc.

Material: Steel zinc plated
Seals: NBR
Flow rate: 0,35 l/stroke*
Pump tube length: 450–865 mm
Pump tube diameter: 40 mm

The telescopic suction tube enables an universal use for all barrel sizes.

G 1½“ and G 2″ drum adapter pump with discharge arc. The outlet has a ¾“ – thread. Therefore other connection options exist.

Order No.: 6015 0000

 

handpumpe-jp-15_large
 
Fire brigade hand pump JP-16

ATEX compliant, single-acting hand pump that can be used for following media of hazard classes A I-III:

Diesel, heating oil, fuel, petroleum, anti freezing liquid for cooler (undilated), thin fluid mineral oils and rapeseed methyl ester.

Execution for fire brigade with flexible suction hose instead of a rigid tube.

Suction hose DN 19 x 4; 1,5 m
Discharge hose DN 19 x 4; 1,5 m
Flow rate: app. 0,25 l/stroke*

In pump housing integrated drum adapters with M 64×4 and G 2″ enable an easy fixing in drums.

Order No.: 6016 0000

 

handpumpe-jp-16_1
 
Battery driven pump JP-111

Suitable for water, diesel, lightly oils, neutral, lightly aggressive and non flammable media.

Only suitable for short-term operation.

Pump material: PP, PE and ABS
Flow rate: 8 l/min*
Pump tube length: 460 mm
Largest suction tube diameter: 33 mm
Discharge hose: 600 mm

Driven by batteries, size D, 1,5 V (not included in price)

Order No.: 6111 0000

JP-111_nw_large

* All specified values are maximum values.
The flow rate of the pump refers to water at 20°C, measured values: ± 5%.