Company | References | Product news        

Laboratory pumps with air operated motor JP-AIR 1

Laboratory pump made of polypropylene or stainless steel with a pump tube diameter of Ø 25, 28 and 32 mm

For transferring and pumping small quantities of neutral and slightly aggressive (with stainless steel pump tube or polypropylene pump tube with stainless steel shaft) or aggressive (with polypropylene pump tube and hastelloy drive shaft) media out of containers with narrow necks.

Air operated motor JP-AIR 1, 300 W at max. 6 bar, with ball valve and silencer, air consumption under load 13 l/sec.

 

Polypropylene
(Drive shaft: Stainless steel) PP (SS)

  Length Order No.
Pump tube
Ø 25 mm
 
500 mm 3625 0050
700 mm 3625 0070
1000 mm 3625 0100
Pump tube
Ø 28 mm
500 mm 3628 0050
700 mm 3628 0070
1000 mm 3628 0100
Pumpwerk
Ø 32 mm
   
700 mm 3632 0070
1000 mm 3632 0100
1200 mm 3632 0120

Polypropylene
(Drive shaft Hastelloy) PP (HC)

  Length Order No.
Pump tube
Ø 25 mm
500 mm 3125 0050
700 mm 3125 0070
1000 mm 3125 0100
Pump tube
Ø 28 mm
500 mm 3128 0050
700 mm 3128 0070
1000 mm 3128 0100
Pump tube
Ø 32 mm
700 mm 3132 0070
1000 mm 3132 0100
1200 mm 3132 0120

Stainless steel 316Ti
(Drive shaft: Stainless steel)

  Length Order No.
Pump tube
Ø 28 mm
700 mm 3228 0070
1000 mm 3228 0100
1200 mm 3228 0120
Pump tube
Ø 32 mm
700 mm 3232 0070
1000 mm 3232 0100
1200 mm 3232 0120

Laborpumpen_mit_Druckluftmotor_JP-AIR1

Hose connection included in delivery:

For pump tube made of PP with Ø 25 mm: hose connection ½“, for pump tube made of PP with Ø 28 and 32 mm: hose connection ¾“.

For SS pump tube with Ø 28 mm: hose connection ¾“, for SS pump tube with Ø 32 mm: hose connection 1″..