Company | References | Product news        

Pump tube made of stainless steel with mechanical seal

for pumping sticky or crystallizing media

Normally sealless pump tubes can be used for almost all applications. Only with sticky, crystallizing, heavily polluted media or when the container is pre-pressurized pump tubes with mechanical seal are necessarily preferable. These tubes are not allowed to run dry.

EC type examination certificate number ZELM 09 ATEX 0424X Ex II 1/2 G c IIB T4.

Stainless steel 316Ti = SS pump tubes with mechanical seal

Suitable for pumping thin fluid to middle viscous media, whether neutral, slightly aggressive or flammable.

The use of a mechanical seal is mandatory when pumping sticky or crystallizing and heavily soiled or solid containing media that prevent the use of a sealless pump tube with carbon bearing.

The mechanical seal used in the pump housing prevents that the pumped medium can flow in the inner tube.

After pumping the sticky or crystallizing media the pump must be absolutely flushed and cleaned (medium temperature up to 90°C with PTFE-rotor).

In contrast to the sealless pump tubes that can be used in 95% of all applications and where dry running because of the construction is not a problem drum pumps with mechanical seal are not allowed to run dry.

 

Stainless steel 316Ti Ø 41 mm
(Drive shaft: stainless steel)

Material Length Order No.
Stainless steel
316Ti
Drive shaft
Stainless steel
700 mm 2741 0070
1000 mm 2741 0100
1200 mm  2741 0120
1500 mm 2741 0150
1800 mm 2741 0180
2100 mm 2741 0210
2400 mm 2741 0240
2700 mm 2741 0270
3000 mm 2741 0300

 

Examples of media

For special applications with sticky, crystallizing, dirty or
solids-containing fluids at which no medium is allowed to flow into inner tube.

Attention: the pump tubes with mechanical seal are not allowed to run dry.

 

Special lengths up to 3,000 mm are available on request with short delivery times.

fasspumpen_stainless_steel