Company | References | Product news        

Electric universal motor

230 Volt, 50 Hz, 460 Watt, IP 24

The drive JP-160 is a compactly built, not explosion-proof, internally ventilated universal motor that has proven
itself in very large numbers for low viscous media such as the urea solution AdBlue.

This handy, very robust and powerful motor can be used to drive the suction tubes of drum pumps. In this combination it is suitable for many thin fluid and slightly viscous, neutral, aggressive and non-flammable liquids (max. 400 mPas). Its sophisticated, technically clear structure ensures an efficient and safe use when transferring a wide range of media.

The drum pump motor is characterized not only by its light weight (2,9 kg) but also by its elegant design and ease of use. The non-stationary and stationary usable drive is particularly suitable for intermittent operation. As internally ventilated motor it has an optimal air cooling, low noise and ensures high operational safety and long lifetime.

The motor housing made of polypropylene ensures a high chemical resistance when aggressive vapours of acids and alkalies are present.

The standard in the on/off switch integrated low voltage release is intended to prevent an uncontrolled start of the drum pump motor after a power failure or voltage drop and thus guarantees maximum safety.

The flow rate of the media to be pumped can be regulated by an optionally available speed control that is integrated in the motor handle. Therefore the flow rate can be adjusted to the needs of the user.

The maximum density of the media is for the JP-160 universal motor 1.3, the maximum viscosity 400 mPas.


Electronic speed control


The speed of the drum pump motor JP-160 can be controlled electronically via a knob on the handle. This enables an adjustment of the flow rate.The electronic speed control is available as
an option.

Motor without pump tube
Version Voltage Order No.
without LVR 230 V 1~, 50 Hz, 460 W 1160 2300
with NSP 230 V 1~, 50 Hz, 460 W 1160 2301
without LVR, with SC 230 V 1~, 50 Hz, 460 W 1160 2302
with LVR + SC
230 V 1~, 50 Hz, 460 W 1160 2303
LVR: Low voltage release
SC: Speed control
Operating  data JP-160
Flow rate (with hose
and oval gear meter)
Ø 41 mm up to 82 l/min* (Rotor)
Ø 41 mm up to 61 l/min* (Impeller)
Head Ø 41 mm up to 9 m* (Rotor)
Ø 41 mm up to 20 m* (Impeller)
Viscosity up to 400 mPas*
Density up to 1,3*
* Test media water 20 ° C, pressure pipe 1″, oval gear meter, measured values: ± 5%


Electric universal motor JP-160

230 Volt, 50 Hz, 460 Watt, IP 24, double insulation protection class II, over load protection switch with integrated low voltage release. 5 m cable with plug.

Speed control as option.