Company | References | Product news        

Electric universal motor
JP-120 / JP-140

230 Volt, 50 Hz, 250 Watt oR 450 watt, IP 24,
alternatively 115 Volt, 60 Hz

The drive is a compactly built, not explosion-proof, internally ventilated universal motor.

The lightweight, handy and powerful device can be used as drive for the pump tubes of the laboratory and drum pumps and is useful in this combination for many thin fluid, neutral, aggressive and non-flammable media. Its sophisticated, technically clear structure ensures an efficient and safe use when transferring a variety of water-like liquids.

The drum pump motor is characterized not only by its light weight (2 and 2,3 kg) but also by its elegant design and ease of use. The non-stationary and stationary usable drive is particularly suitable for intermittent operation. As internally ventilated motor it has an optimal air cooling, low noise level and ensures high operational safety and long time life.

The motor housing made of polypropylene ensures high chemical resistance when aggressive vapours of acids and alkalies are present.

The standard in the on/off switch integrated low voltage release is intended to prevent an uncontrolled start of the drum pump motor after a power failure or voltage drop and thus guarantees maximum safety. By the presence of a thermal protection the life of the engine is significantly increased.

The flow rate of the media that will be pumped can be adjusted by the optionally available speed control that is mounted laterally in the motor housing and therefore adapted to the needs of the user.

The maximum density of the media is for the JP-120 universal motor 1.2, the maximum viscosity 200 mPas.

The maximum density of the media is for the JP-140 universal motor 1.4, the maximum viscosity 400 mPas.

 

Electronic speed control

 

The speed of the drum pump motor JP-120 / JP-140 can be controlled via a knob on the side of the motor housing electronically. This enables an adjustment of the flow rate. The electronic speed control is available as an option.

Motor JP-120 without pump tube
Version Voltage Order No.
without LVR
230 V 1~, 50 Hz, 250 W  1120 2300
115 V 1~, 60 Hz, 250 W  1120 1150
with LVR
230 V 1~, 50 Hz, 250 W  1120 2301
115 V 1~, 60 Hz, 250 W  1120 1151
without LVR, with SC 230 V 1~, 50 Hz, 250 W  1120 2302
115 V 1~, 60 Hz, 250 W  1120 1152
with LVR + SC 230 V 1~, 50 Hz, 250 W  1120 2303
115 V 1~, 60 Hz, 250 W  1120 1153
LVR: Low voltage release
SC: Speed control

Operating data JP-120
Flow rate (with hose
and oval gear meter)
Ø 41 mm up to 71 l/min* (Rotor)
Ø 41 mm up to 55 l/min* (Impeller)
Head Ø 41 mm up to 7 m* (Rotor)
Ø 41 mm up to 16 m* (Impeller)
Viscosity up to 200 mPas*
Density up to 1,2*
* Test media water 20°C, pressure pipe 1″, oval gear meter, measured values: ± 5%

Motor JP-140 without pump tube
Version Voltage Order No.
without LVR
230 V 1~, 50 Hz, 450 W  1140 2300
115 V 1~, 60 Hz, 450 W  1140 1150
with LVR
230 V 1~, 50 Hz, 450 W  1140 2301
115 V 1~, 60 Hz, 450 W  1140 1151
without LVR, with SC 230 V 1~, 50 Hz, 450 W  1140 2302
115 V 1~, 60 Hz, 450 W  1140 1152
with LVR + SC 230 V 1~, 50 Hz, 450 W  1140 2303
115 V 1~, 60 Hz, 450 W  1140 1153
LVR: Low voltage release
SC: Speed control

Operating data JP-140
Flow rate (with hose
and oval gear meter)
Ø 41 mm up to 87 l/min* (Rotor)
Ø 41 mm up to 70 l/min* (Impeller)
Head Ø 41 mm up to 10 m* (Rotor)
Ø 41 mm up to 23 m* (Impeller)
Viscosity up to 400 mPas*
Density up to 1,3*
* Test media water 20°C, pressure pipe 1″, oval gear meter, measured values: ± 5%

fasspumpenmotor_ver_jp_140

Electric universal motor JP-120

230 Volt, 50 Hz, 250 Watt, IP 24, double insulation protection class II, over load protection switch with integrated low voltage release. Thermal protection, 5 m cable with plug.

Also available in 115 volts, 60 Hz.
Speed control as option.

 

foerderkennlinie_fasspumpen_jp-120_en

 


Electric universal motor JP-140

230 Volt, 50 Hz, 450 Watt, IP 24, double insulation protection class II, over load protection switch with integrated low voltage release. Thermal protection, 5 m cable with plug.

Also available in 115 volts, 60 Hz.
Speed control as option.

 

foerderkennlinie_fasspumpen_jp-140_en