Company | References | Product news        

Drum pump-Sets PP

From JESSBERGER are the perfect assistents for fast and safe filling and transferring or emptying of drums and containers

Drum pump-Sets PP are suitable for neutral, aggressive and hardly combustible liquids. They are used specifically for pumping aggressive chemicals such as acids, alkalies or detergents

Drum pump, hose and pump nozzle were perfectly matched based on our decades of experience and guarantee therefore an immediate usability and durability of our drum pumps.

Each of our drum pump sets consists of an electric or air operated drum pump motor, a pump tube suitable for the application, two meter media-proof dispensing hose and a nozzle, which facilitates filling and transferring.

Outside of hazardous areas you can combine each pump tube with each drum pump motor and corresponding accessories and therefore select the a individual drum pump set from JESSBERGER.

 
Drum Pump Set with Electric motor for light acids and alkalis

JP-140 PP (HC) Universal motor JP-140, 230 V, 50 Hz, 450 W, protection class IP 24, double insulated category II, over load protection switch with low voltage release, thermo protection, 5 m cable and plug

Pump tube:
Polypropylene, outer-Ø 41 mm, HC-shaft 2,4610
Connection thread G 1¼“
Hose connection 1″ (DN 25)

2 m PVC-Hose 1″ (DN 25)
2 Hose clamps Stainless steel
1 Nozzle Polypropylene 1″

Operating data JP-140
Flow rate (with hose and
oval gear meter)
Ø 41 mm up to 87 l/min* (Rotor)
Ø 41 mm up to 70 l/min* (Impeller)
Head Ø 41 mm up to 10 m* (Rotor)
Ø 41 mm up to 23 m* (Impeller)
Viscosity up to 400 mPas*
Density up to 1,3*

*Media Water 20°C, pressure pipe 1″, oval gear meter, values: ± 5%

Set with pump tube 1000 mm Order No.
230 V
1141 4110

JP-140-pump-set_1

Drum Pump Set with Electric motor for light acids and alkalis

JP-160 PP (HC) Universal motor JP-160, 230 V, 50 Hz, 460 W, protection class IP 24, double insulated category II, over load protection switch with low voltage release, 5 m cable and plug

Pump tube:
Polypropylene, outer-Ø 41 mm, HC-shaft 2,4610
Connection thread G 1¼“
Hose connection 1″ (DN 25)

2 m PVC-Hose 1″ (DN 25)
2 Hose clamps Stainless steel
1 Nozzle Polyprop­ylene 1″

Operating data JP-160
Flow rate (with hose and
oval gear meter)
Ø 41 mm up to 82 l/min* (Rotor)
Ø 41 mm up to 61 l/min* (Impeller)
Head Ø 41 mm up to 9 m* (Rotor)
Ø 41 mm up to 20 m* (Impeller)
Viscosity up to 400 mPas*
Density up to 1,3*

*Media Water 20°C, pressure pipe 1″, oval gear meter, values: ± 5%

Set with pump tube 1000 mm Order No.
230 V
1161 4110
Set with pump tube 1200 mm  
230 V 1161 4112

JP-160-pump-set_1

Drum Pump Set with Electric motor for light acids and alkalis

JP-180 PP (HC) Universal motor 230 or 115 V, 50/60 Hz, 640 W, splash protection to IP 24, double insulated class II, over load protection switch with low voltage release, 5 m cable with plug

Pump tube:
Polypropylene, outer-Ø 41 mm, HC-shaft 2,4610
Connection thread G 1¼“
Hose connection 1″ (DN 25)

2 m PVC-Hose 1″ (DN 25)
2 Hose clamps stainless steel
1 Nozzle polyprop­ylene 1″

Operating data JP-180
Flow rate (with hose and
oval gear meter)
Ø 41 mm up to 93 l/min* (Rotor)
Ø 41 mm up to 74 l/min* (Impeller)
Head Ø 41 mm up to 11 m* (Rotor)
Ø 41 mm up to 26 m* (Impeller)
Viscosity up to 600 mPas*
Density up to 1,5*

*Media Water 20°C, pressure pipe 1″, oval gear meter, values: ± 5%

Set with pump tube 1000 mm Order No.
230 V
1181 4110
115 V 1182 4110
Set with pump tube 1200 mm  
230 V 1181 4112
115 V 1182 4112
JP-160-pump-set_1
Drum Pump Set with Electric motor for light acids and alkalis

JP-360 PP (HC) Universal motor 230 V, 50 Hz, 640 W, IP 55, protection class I, over load protection with low voltage release, integrated speed control, 5 m cable with plug.
115 V, 60 Hz in preparation

Pump tube:
Polypropylene, outer-Ø 41 mm, HC-shaft 2,4610
Connection thread G 1¼“
Hose connection 1″ (DN 25)

2 m PVC hose 1″ (DN 25)
2 Hose clamps stainless steel
1 Nozzle polyprop­ylene 1″

Operating data JP-360
Flow rate (with hose and
oval gear meter)
Ø 41 mm up to 93 l/min* (Rotor)
Ø 41 mm up to 74 l/min* (Impeller)
Head Ø 41 mm up to 11 m* (Rotor)
Ø 41 mm up to 26 m* (Impeller)
Viscosity up to 600 mPas*
Density up to 1,5*

*Media Water 20°C, pressure pipe 1″, oval gear meter, values: ± 5%

Set with pump tube 1000 mm Order No.
230 V
1363 4110
Set with pump tube 1200 mm  
230 V 1363 4112
JP-360-pump-set_1
Drum pump set with electric motor for media with higher Viscosity

JP-280 PP (HC) Universal motor 230 or 115 V, 50/60 Hz, 825 W, splash protection to IP 24, double insulated class II, over load protection switch with low voltage release, 5 m cable with plug.

Pump tube:
Polypropylene, outer-Ø 41 mm, HC-shaft 2,4610
Connection thread G 1¼“
Hose connection 1″ (DN 25)

2 m PVC hose 1″ (DN 25)
2 Hose clamps stainless steel
1 Nozzle polyprop­ylene 1″

Operating data JP-280
Flow rate (with hose and
oval gear meter)
Ø 41 mm up to 112 l/min* (Rotor)
Ø 41 mm up to 83 l/min* (Impeller)
Head Ø 41 mm up to 16 m* (Rotor)
Ø 41 mm up to 37 m* (Impeller)
Viscosity up to 1000 mPas*
Density up to 1,9*

*Media Water 20°C, pressure pipe 1″, oval gear meter, values: ± 5%

Set with pump tube 1000 mm Order No.
230 V
1281 4110
115 V 1282 4110
Set with pump tube 1200 mm  
230 V 1281 4120
115 V 1282 4120
JP-160-pump-set_1