Company | References | Product news        

Drum pump-Sets

From JESSBERGER are the perfect assistents for fast and safe filling and transferring or emptying of drums and containers

Drum pump, hose and pump nozzle were perfectly matched based on our decades of experience and guarantee therefore an immediate usability and durability of our drum pumps.

Each of our drum pump sets consists of an electric or air operated drum pump motor, a pump tube suitable for the application, two meter media-proof dispensing hose and a nozzle, which facilitates filling and transferring.

Outside of hazardous areas you can combine each pump tube with each drum pump motor and corresponding accessories and therefore select the a individual drum pump set from JESSBERGER.

 
Drum Pump Set with Electric motor for light acids and alkalis

JP-140 PP (HC) Universal motor JP-140, 230 V, 50 Hz, 450 W, protection class IP 24, double insulated category II, over load protection switch with low voltage release, thermo protection, 5 m cable and plug

Pump tube:
Polypropylene, outer-Ø 41 mm, HC-shaft 2,4610
Connection thread G 1¼“
Hose connection 1″ (DN 25)

2 m PVC-Hose 1″ (DN 25)
2 Hose clamps Stainless steel
1 Nozzle Polypropylene 1″

Operating data JP-140
Flow rate (with hose and
oval gear meter)
Ø 41 mm up to 87 l/min* (Rotor)
Ø 41 mm up to 70 l/min* (Impeller)
Head Ø 41 mm up to 10 m* (Rotor)
Ø 41 mm up to 23 m* (Impeller)
Viscosity up to 400 mPas*
Density up to 1,3*

*Media Water 20°C, pressure pipe 1″, oval gear meter, values: ± 5%

Set with pump tube 1000 mm Order No.
230 V
1141 4110

JP-140-pump-set_1

Drum Pump Set with Electric motor for light acids and alkalis

JP-160 PP (HC) Universal motor JP-160, 230 V, 50 Hz, 460 W, protection class IP 24, double insulated category II, over load protection switch with low voltage release, 5 m cable and plug

Pump tube: 
Polypropylene, outer-Ø 41 mm, HC-shaft 2,4610
Connection thread G 1¼“
Hose connection 1″ (DN 25)

2 m PVC-Hose 1″ (DN 25)
2 Hose clamps Stainless steel
1 Nozzle Polyprop­ylene 1″

Operating data JP-160
Flow rate (with hose and
oval gear meter)
Ø 41 mm up to 82 l/min* (Rotor)
Ø 41 mm up to 61 l/min* (Impeller)
Head Ø 41 mm up to 9 m* (Rotor)
Ø 41 mm up to 20 m* (Impeller)
Viscosity up to 400 mPas*
Density up to 1,3*

*Media Water 20°C, pressure pipe 1″, oval gear meter, values: ± 5%

Set with pump tube 1000 mm Order No.
230 V
1161 4110
Set with pump tube 1200 mm  
230 V 1161 4112

JP-160-pump-set_1

Drum Pump Set with Electric motor for light acids and alkalis

JP-180 PP (HC) Universal motor 230 or 115 V, 50/60 Hz, 640 W, splash protection to IP 24, double insulated class II, over load protection switch with low voltage release, 5 m cable with plug

Pump tube:
Polypropylene, outer-Ø 41 mm, HC-shaft 2,4610
Connection thread G 1¼“
Hose connection 1″ (DN 25)

2 m PVC-Hose 1″ (DN 25)
2 Hose clamps stainless steel
1 Nozzle polyprop­ylene 1″

Operating data JP-180
Flow rate (with hose and
oval gear meter)
Ø 41 mm up to 93 l/min* (Rotor)
Ø 41 mm up to 74 l/min* (Impeller)
Head Ø 41 mm up to 11 m* (Rotor)
Ø 41 mm up to 26 m* (Impeller)
Viscosity up to 600 mPas*
Density up to 1,5*

*Media Water 20°C, pressure pipe 1″, oval gear meter, values: ± 5%

Set with pump tube 1000 mm Order No.
230 V
1181 4110
115 V 1182 4110
Set with pump tube 1200 mm  
230 V 1181 4112
115 V 1182 4112
JP-160-pump-set_1
Drum Pump Set with Electric motor for light acids and alkalis

JP-360 PP (HC) Universal motor 230 V, 50 Hz, 640 W, IP 55, protection class I, over load protection, low voltage release, integrated speed control, 5 m cable with plug.
115 V, 60 Hz in preparation

Pump tube:
Polypropylene, outer-Ø 41 mm, HC-shaft 2,4610
Connection thread G 1¼“
Hose connection 1″ (DN 25)

2 m PVC hose 1″ (DN 25)
2 Hose clamps stainless steel
1 Nozzle polyprop­ylene 1″

Operating data JP-360
Flow rate (with hose and
oval gear meter)
Ø 41 mm up to 93 l/min* (Rotor)
Ø 41 mm up to 74 l/min* (Impeller)
Head Ø 41 mm up to 11 m* (Rotor)
Ø 41 mm up to 26 m* (Impeller)
Viscosity up to 600 mPas*
Density up to 1,5*

*Media Water 20°C, pressure pipe 1″, oval gear meter, values: ± 5%

Set with pump tube 1000 mm Order No.
230 V
1363 4110
Set with pump tube 1200 mm  
230 V 1363 4112
JP-360-pump-set_1
Drum pump set with electric motor for media with higher Viscosity

JP-280 PP (HC) Universal motor 230 or 115 V, 50/60 Hz, 825 W, splash protection to IP 24, double insulated class II, over load protection switch with low voltage release, 5 m cable with plug.

Pump tube:
Polypropylene, outer-Ø 41 mm, HC-shaft 2,4610
Connection thread G 1¼“
Hose connection 1″ (DN 25)

2 m PVC hose 1″ (DN 25)
2 Hose clamps stainless steel
1 Nozzle polyprop­ylene 1″

Operating data JP-280
Flow rate (with hose and
oval gear meter)
Ø 41 mm up to 112 l/min* (Rotor)
Ø 41 mm up to 83 l/min* (Impeller)
Head Ø 41 mm up to 16 m* (Rotor)
Ø 41 mm up to 37 m* (Impeller)
Viscosity up to 1000 mPas*
Density up to 1,9*

*Media Water 20°C, pressure pipe 1″, oval gear meter, values: ± 5%

Set with pump tube 1000 mm Order No.
230 V
1281 4110
115 V 1282 4110
Set with pump tube 1200 mm  
230 V 1281 4120
115 V 1282 4120
JP-160-pump-set_1
Drum pump set with electric motor for mineral oil products such as oils, diesel and antifreeze

JP-280 ALU Universal motor 230 or 115 V, 50/60 Hz, 825 W, splash protection to IP 24, double insulated class II, over load protection switch with low voltage release, 5 m cable with plug

Pump tube:
Aluminium, outer-Ø 41 mm, shaft stainless steel
Connection thread G 1¼“
Hose connection 1″ (DN 25)

2 m Mineral oil hose 1″ (DN 25)
2 Hose clamps stainless steel
1 Nozzle aluminium 1″

Operating data JP-280
Flow rate (with hose and
oval gear meter)
Ø 41 mm up to 112 l/min* (Rotor)
Ø 41 mm up to 83 l/min* (Impeller)
Head Ø 41 mm up to 16 m* (Rotor)
Ø 41 mm up to 37 m* (Impeller)
Viscosity up to 1000 mPas*
Density up to 1,9*

*Media Water 20°C, pressure pipe 1″, oval gear meter, values: ± 5%

Set with pump tube 1000 mm Order No.
230 V
1281 4111
115 V 1282 4111
JP-280-pump-set_alu
Drum pump set with electric motor for highly concentrated acids and alkalis

JP-280 PVDF Universal motor 230 or 115 V, 50/60 Hz, 825 W, splash protection to IP 24, double insulated class II, over load protection switch with low voltage release, 5 m cable with plug

Pump tube:
PVDF outer-Ø 41 mm, HC-shaft 2,4610
Connection thread G 1¼“
Hose connection 1″ (DN 25)

2 m Multi purpose chemical hose 1″ (DN 25)
2 Hose clamps stainless steel
1 Nozzle PVDF 1″

Operating data JP-280
Flow rate (with hose and
oval gear meter)
Ø 41 mm up to 112 l/min* (Rotor)
Ø 41 mm up to 83 l/min* (Impeller)
Head Ø 41 mm up to 16 m* (Rotor)
Ø 41 mm up to 37 m* (Impeller)
Viscosity up to 1000 mPas*
Density up to 1,9*

*Media Water 20°C, pressure pipe 1″, oval gear meter, values: ± 5%

Set with pump tube 1000 mm Order No.
230 V
1281 4112
115 V 1282 4112
Set with pump tube 1200 mm  
230 V 1281 4122
115 V 1282 4122
JP-280-pump-set_pvdf
Drum pump set with electric motor for neutral and slightly aggressive media

JP-280 SS Universal motor 230 or 115 V, 50/60 Hz, 825 W, splash protection to IP 24, double insulated class II, over load protection switch with low voltage release, 5 m cable with plug

Pump tube:
Stainless steel 316Ti, outer-Ø 41 mm, shaft stainless steel
Connection thread G 1¼“
Hose connection 1″ (DN 25)

2 m PVC hose 1″ (DN 25)
2 Hose clamps stainless steel
1 Nozzle polyproylene 1″

Operating data JP-280
Flow rate (with hose and
oval gear meter)
Ø 41 mm up to 112 l/min* (Rotor)
Ø 41 mm up to 83 l/min* (Impeller)
Head Ø 41 mm up to 16 m* (Rotor)
Ø 41 mm up to 37 m* (Impeller)
Viscosity up to 1000 mPas*
Density up to 1,9*

*Media Water 20°C, pressure pipe 1″, oval gear meter, values: ± 5%

Set with pump tube 1000 mm Order No
230 V
1281 4113
115 V 1282 4113
JP-280-pump-set_stainless_steel
Drum pump set with electric motor for neutral and aggressive media

JP-380 PVDF Universal motor 230 V, 50 Hz, 825 W, IP 55, protection class I, over load protection, low voltage release, integrated speed control, 5 m cable with plug.
115 V, 60 Hz in preparation

Pump tube:
PVDF outer-Ø 41 mm, HC-shaft 2,4610
Connection thread G 1¼“
Hose connection 1″ (DN 25)

2 m Multi purpose hose 1″ (DN 25)
2 Hose clamps stainless steel
1 Nozzle PVDF 1″

Operating data JP-380
Flow rate (with hose and
oval gear meter)
Ø 41 mm up to 112 l/min* (Rotor)
Ø 41 mm up to 83 l/min* (Impeller)
Head Ø 41 mm up to 16 m* (Rotor)
Ø 41 mm up to 37 m* (Impeller)
Viscosity up to 1000 mPas*
Density up to 1,9*

*Media Water 20°C, pressure pipe 1″, oval gear meter, values: ± 5%

Set with pump tube 1000 mm Order No.
230 V
1383 4110
Set with pump tube 1200 mm  
230 V 1383 4112
JP-380-pump-set_1
Drum pump set with electric motor for flammable media

JP-400 SS Motor Ex-protection, 230 V, 50 Hz, 550 W protection class Ex de IIA T6, splash protection to IP 54, on/off switch, 5 m cable without plug, double insulated class II, over load protection switch with low voltage release.
Certificate number ZELM 09 ATEX 0425 X

Pump tube:
Stainless steel 316Ti, outer-Ø 41 mm
Connection thread G 1¼“
Hose connection 1″
Certificate number ZELM 09 ATEX 0424 X

2 m Multi purpose hose 1″ (DN 25)
2 Hose connectors stainless steel
1 Nozzle Brass nickel plated
1 Bonding ground set

Operating data JP-400
Flow rate (with hose and
oval gear meter)
Ø 41 mm up to 97 l/min* (Rotor)
Ø 41 mm up to 71 l/min* (Impeller)
Head Ø 41 mm up to 11 m* (Rotor)
Ø 41 mm up to 20 m* (Impeller)
Viscosity up to 600 mPas*
Density up to 1,5*

*Media Water 20°C, pressure pipe 1″, oval gear meter, values: ± 5%

Set with pump tube 1000 mm Order No.
230 V
1402 4110
Set with pump tube 1200 mm  
230 V 1402 4120
JP-400-pump-set_1
Drum pump set with electric motor for flammable media

JP-440 SS Motor Ex-protection, 230 V, 50/60 Hz, 460 W
protection class II 2G Ex db IIC T6 Gb, splash protection to IP 55, double isolated class II, over load protection switch
with low voltage release, 5 m cable without plug.
EC type examination certificate
Bureau Veritas EPS 17 ATEX 1 088 X
IECEx Certificate of Conformity IECEx EPS 17.0045X

Pump tube:
Stainless steel 316Ti, outer-Ø 41 mm
Connection thread G 1¼“
Hose connection 1″
Certificate number ZELM 09 ATEX 0424 X

2 m Multi purpose hose 1″ (DN 25)
2 Hose connectors stainless steel
1 Nozzle Brass nickel plated
1 Bonding ground set

Operating data JP-440
Flow rate (with hose and
oval gear meter)
Ø 41 mm up to 82 l/min* (Rotor)
Ø 41 mm up to 61 l/min* (Impeller)
Head Ø 41 mm up to 9 m* (Rotor)
Ø 41 mm up to 20 m* (Impeller)
Viscosity up to 400 mPas*
Density up to 1,3*

*Media Water 20°C, pressure pipe 1″, oval gear meter, values: ± 5%

Set with pump tube 1000 mm Order No.
230 V
1442 4110
Drum pump set with electric motor for flammable media

JP-480 SS Motor Ex-protection, 230 V, 50/60 Hz, 460 W
protection class II 2G Ex db IIC T6 Gb, splash protection to IP 55, double isolated class II, over load protection switch
with low voltage release, 5 m cable without plug.
EC type examination certificate
Bureau Veritas EPS 17 ATEX 1 088 X
IECEx Certificate of Conformity IECEx EPS 17.0045X

Pump tube:
Stainless steel 316Ti, outer-Ø 41 mm
Connection thread G 1¼“
Hose connection 1″
Certificate number ZELM 09 ATEX 0424 X

2 m Multi purpose hose 1″ (DN 25)
2 Hose connectors stainless steel
1 Nozzle Brass nickel plated
1 Bonding ground set

Operating data JP-480
Flow rate (with hose and
oval gear meter)
Ø 41 mm up to 112 l/min* (Rotor)
Ø 41 mm up to 83 l/min* (Impeller)
Head Ø 41 mm up to 16 m* (Rotor)
Ø 41 mm up to 37 m* (Impeller)
Viscosity up to 1000 mPas*
Density up to 1,9*

*Media Water 20°C, pressure pipe 1″, oval gear meter, values: ± 5%

Set with pump tube 1200 mm Order No.
230 V
1402 4110