Company | References | Product news        

Drum pump-Sets stainless steel

From JESSBERGER are the perfect assistents for fast and safe filling and transferring or emptying of drums and containers

Drum pump sets stainless steel 316 Ti are used for all neutral, slightly aggressive liquids such as diluted acids, alkalies or detergents and thin fluid food. In addition the pump tubes provide a special safety for conveying or transferring flammable liquids of different hazard classes (up to temperature class 4) in the ex zone 0 and when pumping low-viscous neutral or slightly aggressive media in ex zones 1 and 2.

Drum pump, hose and pump nozzle were perfectly matched based on our decades of experience and guarantee therefore an immediate usability and durability of our drum pumps.

Each of our drum pump sets consists of an electric or air operated drum pump motor, a pump tube suitable for the application, two meter media-proof dispensing hose and a nozzle, which facilitates filling and transferring.

Outside of hazardous areas you can combine each pump tube with each drum pump motor and corresponding accessories and therefore select the a individual drum pump set from JESSBERGER.

 
Drum pump set with electric motor for neutral and slightly aggressive media

JP-280 SS Universal motor 230 or 115 V, 50/60 Hz, 825 W, splash protection to IP 24, double insulated class II, over load protection switch with low voltage release, 5 m cable with plug

Pump tube:
Stainless steel 316Ti, outer-Ø 41 mm, shaft stainless steel
Connection thread G 1¼“
Hose connection 1″ (DN 25)

2 m PVC hose 1″ (DN 25)
2 Hose clamps stainless steel
1 Nozzle polyproylene 1″

Operating data JP-280
Flow rate (with hose and
oval gear meter)
Ø 41 mm up to 112 l/min* (Rotor)
Ø 41 mm up to 83 l/min* (Impeller)
Head Ø 41 mm up to 16 m* (Rotor)
Ø 41 mm up to 37 m* (Impeller)
Viscosity up to 1000 mPas*
Density up to 1,9*

*Media Water 20°C, pressure pipe 1″, oval gear meter, values: ± 5%

Set with pump tube 1000 mm Order No
230 V
1281 4113
115 V 1282 4113
JP-280-pump-set_stainless_steel
Drum pump set with electric motor for flammable media

JP-400 SS Motor Ex-protection, 230 Volt, 50/60 Hz, 550 Watt, protection II 2G Ex de IIA T6, IP54, double insulated protection class II, over load protection switch with integrated low voltage release. 5 m cable without plug.
Certificate number ZELM 09 ATEX 0425 X

Pump tube:
Stainless steel 316Ti, outer-Ø 41 mm
Connection thread G 1¼“
Hose connection 1″
Certificate number ZELM 09 ATEX 0424 X

2 m Multi purpose hose 1″ (DN 25)
2 Hose connectors stainless steel
1 Nozzle Brass nickel plated
1 Bonding ground set

Operating data JP-400
Flow rate (with hose and
oval gear meter)
Ø 41 mm up to 97 l/min* (Rotor)
Ø 41 mm up to 71 l/min* (Impeller)
Head Ø 41 mm up to 11 m* (Rotor)
Ø 41 mm up to 20 m* (Impeller)
Viscosity up to 600 mPas*
Density up to 1,5*

*Media Water 20°C, pressure pipe 1″, oval gear meter, values: ± 5%

Set with pump tube 1000 mm Order No.
230 V
1402 4110
Set with pump tube 1200 mm  
230 V 1402 4120
JP-400-pump-set_1
Drum pump set with electric motor for flammable media

JP-440 SS Motor Ex-protection, 230 V, 50/60 Hz, 460 W, protection class II 2G Ex db IIC T6 Gb, IP 55, overload protection with integrated low voltage release, 5 m cable without plug. Optional with Ex-plug.

EC type examination certificate
Bureau Veritas EPS 17 ATEX 1 088 X
IECEx Certificate of Conformity IECEx EPS 17.0045X

Pump tube:
Stainless steel 316Ti, outer-Ø 41 mm
Connection thread G 1¼“
Hose connection 1″
Certificate number ZELM 09 ATEX 0424 X

2 m Multi purpose hose 1″ (DN 25)
2 Hose connectors stainless steel
1 Nozzle Brass nickel plated
1 Bonding ground set

Operating data JP-440
Flow rate (with hose and
oval gear meter)
Ø 41 mm up to 82 l/min* (Rotor)
Ø 41 mm up to 61 l/min* (Impeller)
Head Ø 41 mm up to 9 m* (Rotor)
Ø 41 mm up to 20 m* (Impeller)
Viscosity up to 400 mPas*
Density up to 1,3*

*Media Water 20°C, pressure pipe 1″, oval gear meter, values: ± 5%

Set with pump tube 1000 mm Order No.
230 V
1442 4110
Drum pump set with electric motor for flammable media

JP-480 SS Motor Ex-protection, 230 V, 50/60 Hz, 460 W, protection class II 2G Ex db IIC T6 Gb, IP 55, overload protection with integrated low voltage release, 5 m cable without plug. Optional with Ex-plug.

EC type examination certificate
Bureau Veritas EPS 17 ATEX 1 088 X
IECEx Certificate of Conformity IECEx EPS 17.0045X

Pump tube:
Stainless steel 316Ti, outer-Ø 41 mm
Connection thread G 1¼“
Hose connection 1″
Certificate number ZELM 09 ATEX 0424 X

2 m Multi purpose hose 1″ (DN 25)
2 Hose connectors stainless steel
1 Nozzle Brass nickel plated
1 Bonding ground set

Operating data JP-480
Flow rate (with hose and
oval gear meter)
Ø 41 mm up to 112 l/min* (Rotor)
Ø 41 mm up to 83 l/min* (Impeller)
Head Ø 41 mm up to 16 m* (Rotor)
Ø 41 mm up to 37 m* (Impeller)
Viscosity up to 1000 mPas*
Density up to 1,9*

*Media Water 20°C, pressure pipe 1″, oval gear meter, values: ± 5%

Set with pump tube 1200 mm Order No.
230 V
1402 4110
Drum pump set with air operated motor for flammable media

Air operated motor JP-AIR 1, 300 W at max. 6 bar operating pressure. Motor with brass ball valve and muffler for compressed air control. This regulates the motor speed and varies the pumping capacity, Ex II 2 GD c IIC (80 °C) X.
Certificate number IBEx U05 ATEX B007 X

Pump tube:
Stainless steel 316 Ti, outer-Ø 41 mm,
connection thread G 1¼“
Certificate number ZELM 09 ATEX 0424 X

2 m Multi purpose hose 1″ (DN 25)
2 Hose connectors Stainless steel, clamps made of aluminium
1 Nozzle Brass nickel plated
1 Bonding ground set

 

Operating data JP-AIR 1
Flow rate (with hose and
oval gear meter)
Ø 41 mm up to 78 l/min* (Rotor)
Ø 41 mm up to 60 l/min* (Impeller)
Head Ø 41 mm up to 9 m* (Rotor)
Ø 41 mm up to 13 m* (Impeller)
Viscosity up to 400 mPas*
Density up to 1,3*

*Media Water 20°C, pressure pipe 1″, oval gear meter, values: ± 5%

Set with pump tube 1000 mm Order No.
230 V
3012 4110
Set with pump tube 1200 mm  
230 V 3012 4120
Drum pump set with air operated motor for flammable media

Air operated motor JP-AIR 2, 600 W at max. 6 bar operating pressure, Ex 2GD c IIC T6 (80 °C) X, with silencer, lockable on/off switch as a button.
Certificate number IBEx U07 ATEX B014 X

Pump tube:
Stainless steel 316 Ti, outer-Ø 41 mm,
connection thread G 1¼“
Certificate number ZELM 09 ATEX 0424 X

2 m Multi purpose hose 1″ (DN 25)
2 Hose connectors Stainless steel, clamps made of aluminium
1 Nozzle Brass nickel plated
1 Bonding ground set

 

Operating data JP-AIR 2
Flow rate (with hose and
oval gear meter)
Ø 41 mm up to 80 l/min* (Rotor)
Ø 41 mm up to 66 l/min* (Impeller)
Head Ø 41 mm up to 10 m* (Rotor)
Ø 41 mm up to 15 m* (Impeller)
Viscosity up to 600 mPas*
Density up to 1,5*

*Media Water 20°C, pressure pipe 1″, oval gear meter, values: ± 5%

Set with pump tube 1000 mm Order No.
230 V
3022 4110
Drum pump set with air operated motor for flammable media

Air operated motor JP-AIR 3, 400 W at max. 6 bar operating pressure, Motor with brass valve and muffler for compressed air control, Ex II 2 GD c IIC (80 °C) X.
Certificate number IBEx U05 ATEX B007 X

Pump tube:
Stainless steel 316 Ti, outer-Ø 41 mm,
connection thread G 1¼“
Certificate number ZELM 09 ATEX 0424 X

2 m Multi purpose hose 1″ (DN 25)
2 Hose connectors Stainless steel, clamps made of aluminium
1 Nozzle Brass nickel plated
1 Bonding ground set

 

Operating data JP-AIR 3
Flow rate (with hose and
oval gear meter)
Ø 41 mm up to 91 l/min* (Rotor)
Ø 41 mm up to 71 l/min* (Impeller)
Head Ø 41 mm up to 13 m* (Rotor)
Ø 41 mm up to 25 m* (Impeller)
Viscosity up to 600 mPas*
Density up to 1,5*

*Media Water 20°C, pressure pipe 1″, oval gear meter, values: ± 5%

Set with pump tube 1000 mm Order No.
230 V
3032 4110