Company | References | Product news        

Drum pump-Sets PVDF

From JESSBERGER are the perfect assistents for fast and safe filling and transferring or emptying of drums and containers

Drum pump set PVDF are especially suitable for highly
aggressive liquids such as concentrated acids and bases.

Drum pump, hose and pump nozzle were perfectly matched based on our decades of experience and guarantee therefore an immediate usability and durability of our drum pumps.

Each of our drum pump sets consists of an electric or air operated drum pump motor, a pump tube suitable for the application, two meter media-proof dispensing hose and a nozzle, which facilitates filling and transferring.

Outside of hazardous areas you can combine each pump tube with each drum pump motor and corresponding accessories and therefore select the a individual drum pump set from JESSBERGER.

 
Drum pump set with electric motor for highly concentrated acids and alkalis

JP-280 PVDF Universal motor 230 or 115 V, 50/60 Hz, 825 W, splash protection to IP 24, double insulated class II, over load protection switch with low voltage release, 5 m cable with plug.

Pump tube:
PVDF outer-Ø 41 mm, HC-shaft 2,4610
Connection thread G 1¼“
Hose connection 1″ (DN 25)

2 m Multi purpose chemical hose 1″ (DN 25)
2 Hose clamps stainless steel
1 Nozzle PVDF 1″

Operating data JP-280
Flow rate (with hose and
oval gear meter)
Ø 41 mm up to 112 l/min* (Rotor)
Ø 41 mm up to 83 l/min* (Impeller)
Head Ø 41 mm up to 16 m* (Rotor)
Ø 41 mm up to 37 m* (Impeller)
Viscosity up to 1000 mPas*
Density up to 1,9*

*Media Water 20°C, pressure pipe 1″, oval gear meter, values: ± 5%

Set with pump tube 1000 mm Order No.
230 V
1281 4112
115 V 1282 4112
Set with pump tube 1200 mm  
230 V 1281 4122
115 V 1282 4122
JP-280-pump-set_pvdf
Drum pump set with electric motor for neutral and aggressive media

JP-380 PVDF Universal motor 230 V, 50 Hz, 825 W, IP 55, protection class I, over load protection with low voltage release, integrated speed control, 5 m cable with plug.
115 V, 60 Hz in preparation

Pump tube:
PVDF outer-Ø 41 mm, HC-shaft 2,4610
Connection thread G 1¼“
Hose connection 1″ (DN 25)

2 m Multi purpose hose 1″ (DN 25)
2 Hose clamps stainless steel
1 Nozzle PVDF 1″

Operating data JP-380
Flow rate (with hose and
oval gear meter)
Ø 41 mm up to 112 l/min* (Rotor)
Ø 41 mm up to 83 l/min* (Impeller)
Head Ø 41 mm up to 16 m* (Rotor)
Ø 41 mm up to 37 m* (Impeller)
Viscosity up to 1000 mPas*
Density up to 1,9*

*Media Water 20°C, pressure pipe 1″, oval gear meter, values: ± 5%

Set with pump tube 1000 mm Order No.
230 V
1383 4110
Set with pump tube 1200 mm  
230 V 1383 4112
JP-380-pump-set_1